Dc26-M
dodgymike·dc26-monero-badge-pcb
About the Dc26-M PCB
Dc26-M is an open source PCB design by dodgymike, published on GitHub. It is a 2-layer board measuring 120 × 125 mm, with 636 components from 14 distinct parts.
By type, the board carries 576 diodes, 23 capacitors, 14 resistors and 5 LEDs.
It belongs with the wearables designs in this gallery.
From the project
Defcon 26 Monero badge PCB
Dc26-M bill of materials (BOM)
636 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | SW_Push | SW_SPST_B3S-1000 | B_L1, B_L2, B_L3, B_L4, B_R1, B_R2, B_R3, B_R4 +2 |
| 2 | 74LS165 | TSSOP-16_4.4x5mm_Pitch0.65mm | B_SHIFT_1, B_SHIFT_2 |
| 2 | CONN_01X04 | JST_GH_BM04B-GHS-TBT_04x1.25mm_Straight | CON_BTNS1, CON_LEDS1 |
| 1 | CONN_01X07 | JST_PH_B7B-PH-SM4-TB_07x2.00mm_Straight | CON_IR1 |
| 3 | TSOP38238 | IR_Receiver | IR_RX_F1, IR_RX_L2, IR_RX_R2 |
| 1 | CONN_01X02 | Pin_Header_Angled_1x02_Pitch2.54mm | CON_PWR1 |
| 3 | IR204A | LED_0603 | IR_RX_L1, IR_RX_R1, IR_TX_F1 |
| 1 | LED | LED_0603 | PWR_IND1 |
| 576 | APA102 | APA102-2020 | D1, D2, D3, D4, D5, D6, D7, D8 +568 |
| 8 | 1UF C_Small | C_0603 | C1, C4, C9, C12, C13, C14, C20, C22 |
| 4 | 0.1UF C_Small | C_0603 | C2, C3, C5, C6 |
| 11 | C_Small | C_0603 | C7, C8, C10, C11, C15, C16, C17, C18 +3 |
| 3 | 100R | R_0603 | R1, R2, R3 |
| 11 | 10K 100R | R_0603 | R4, R5, R6, R7, R8, R9, R10, R11 +3 |
Dc26-M design files
The KiCad project lives in the dodgymike/dc26-monero-badge-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutdc26-M.kicad_pcb
- BOMdc26.csv
Dc26-M: common questions
How big is the Dc26-M PCB?
The Dc26-M measures 120 × 125 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dc26-M?
636 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dc26-M design files?
From the dodgymike/dc26-monero-badge-pcb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Dc26-M design in my own project?
The repository has no license, so all rights stay with dodgymike. Use it as a reference, and ask the author before reusing the design.
More boards in dc26-monero-badge-pcb
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k