G1-ata-25
About the G1-ata-25 PCB
G1-ata-25 is an open source PCB design by doragasu, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 81.3 × 130.5 mm, with 32 components from 23 distinct parts.
Other key parts include the DSC1001 and TS30011-M050. By type, the board carries 8 connectors, 8 capacitors, 5 jumpers, 3 diodes, 3 resistors and 2 ICs.
From the project
G1-ATA interface for embedding 2.5" ATA hard disks inside the Dreamcast console
Main components on the G1-ata-25
G1-ata-25 bill of materials (BOM)
32 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DSC1001 | DSC1001-32x25M | U1 |
| 1 | TS30011-M050 | QFN-16-1EP_3x3mm_Pitch0.5mm | U2 |
| 1 | G1_DC_SOCKET | MOLEX_53408-0570 | P1 |
| 1 | G1_GD_PLUGNH | MOLEX_52584-0508 | P2 |
| 1 | IDE_40PIN | Pin_Header_Straight_2x20 | P3 |
| 1 | IDE_44PIN | SOCKET_2X22_2MM_ANGLE | P4 |
| 1 | CONN_01X02 | Socket_MOLEX-KK-RM2-54mm_Lock_2pin_straight | P5 |
| 2 | CONN_01X04 | Socket_MOLEX-KK-RM3-96mm_Lock_4pin_straight | P6, P7 |
| 1 | CONN_01X05 | Socket_Strip_Straight_1x05 | P8 |
| 2 | F_Small | C_0805 | F1, F2 |
| 4 | JUMPER3 | Pin_Header_Straight_1x03 | JP1, JP2, JP3, JP4 |
| 1 | JUMPER | Pin_Header_Straight_1x02 | JP5 |
| 1 | LED | LED_0603 | D1 |
| 2 | D | MiniMELF_Standard | D2, D3 |
| 1 | 4.7u | INDUCTOR-NR4018 | L1 |
| 3 | 22u | C_1206 | C1, C6, C7 |
| 2 | 100n | C_0805 | C2, C8 |
| 1 | 10u | C_0805 | C3 |
| 1 | NP | C_0805 | C4 |
| 1 | 22n | C_0805 | C5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R | R_0805 | R1 |
| 1 | 0 | R_0805 | R2 |
| 1 | NP | R_0805 | R3 |
G1-ata-25 design files
The KiCad project lives in the doragasu/g1-ata-25 repository on GitHub; these links point at the commit this page was built from.
- Layoutg1-ata-25.kicad_pcb
G1-ata-25: common questions
How big is the G1-ata-25 PCB?
The G1-ata-25 measures 81.3 × 130.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the G1-ata-25?
32 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the G1-ata-25 design files?
From the doragasu/g1-ata-25 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the G1-ata-25 design in my own project?
Yes, under the terms of its GPL-3.0 license, which doragasu chose for the repository.