Keyboard2 auto
About the Keyboard2 auto PCB
Keyboard2 auto is an open source PCB design by duskmoon314, published on GitHub under the MIT license. It is a 2-layer board measuring 315 × 105 mm, with 125 components from 26 distinct parts.
By type, the board carries 62 diodes, 11 switches, 2 modules, 2 crystals, 2 connectors and 1 IC.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
bluetooth hid 60 keyboard, drived by arduino uno
Keyboard2 auto bill of materials (BOM)
125 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | u1 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | a1, m1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | q1 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | x1, y1 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | j1, p1 |
| 1 | Conn_01x08 | PinHeader_1x08_P1.00mm_Vertical | JC1 |
| 1 | Conn_01x02 | PinHeader_1x02_P1.00mm_Vertical | JG1 |
| 1 | Conn_01x09 | PinHeader_1x09_P1.00mm_Vertical | JR1 |
| 11 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 +3 |
| 19 | SW_Push | SW_Cherry_MX_1.00u_PCB | b1, backtick1, comma1, dot1, e1, g1, i1, minus1 +11 |
| 2 | SW_Push | SW_Cherry_MX_1.50u_PCB | backslash1, tab1 |
| 1 | SW_Push | SW_Cherry_MX_2.00u_PCB | backspace1 |
| 1 | SW_Push | SW_Cherry_MX_1.75u_PCB | capslock1 |
| 2 | SW_Push | SW_Cherry_MX_2.25u_PCB | enter1, lshift1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | f1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | h1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | k1 |
| 7 | SW_Push | SW_Cherry_MX_1.25u_PCB | lalt1, lctrl1, lwin1, menu1, ralt1, rctrl1, rwin1 |
| 1 | SW_Push | SW_Cherry_MX_2.75u_PCB | rshift1 |
| 1 | SW_Push | SW_Cherry_MX_6.25u_PCB | space1 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | t1 |
| 61 | DIODE | D_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +53 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | d1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | l1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | c1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_PCB | r1 |
Keyboard2 auto design files
The KiCad project lives in the duskmoon314/uno_bthid_60 repository on GitHub; these links point at the commit this page was built from.
Keyboard2 auto: common questions
How big is the Keyboard2 auto PCB?
The Keyboard2 auto measures 315 × 105 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keyboard2 auto?
125 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Keyboard2 auto design files?
From the duskmoon314/uno_bthid_60 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Keyboard2 auto design in my own project?
Yes, under the terms of its MIT license, which duskmoon314 chose for the repository.
More boards in uno_bthid_60
Similar boards
Lily58 Pro BOTTOM
kata0510
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Lite Rev3 TOP Case
142.5 × 106.4 mm34 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k