430Badge
eeproto·430Badge·kicad/Badge.kicad_pcb
About the 430Badge PCB
430Badge is an open source PCB design by eeproto, published on GitHub. It is a 2-layer board measuring 111.9 × 53 mm, with 24 components from 12 distinct parts.
Other key parts include the LMC555CMX/NOPB. By type, the board carries 10 resistors, 8 diodes, 3 capacitors, 1 IC, 1 battery holder and 1 switch.
It belongs with the wearables designs in this gallery.
From the project
Solder practice board for ECET 430
This is a KiCad design to practice surface mount soldering.
Easy surface mount and a few through hole parts to practice working with a stencil, pick and place, and reflow soldering.
- kicad KiCad project with schematic, pcb layout - graphics Graphic files for outline and silk development - fabrication BOM and Gerbers for manufacturing - plots Board renderings and schematic
Main components on the 430Badge
430Badge bill of materials (BOM)
24 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMC555CMX/NOPB LMC555xM | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 36-103-ND Battery_Cell | BatteryHolder_Keystone_103_1x20mm | BT1 |
| 1 | DS01-254-L-01BE SW_SPST | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 4 | QBLP631-R5-2897 red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4 |
| 4 | QBLP631-AG1 green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D6, D7, D8 |
| 1 | CAP CER 10UF 16V 0805 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | CAP CER 10UF 16V 0805 C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | CAP CER 0.1UF 25V 0805 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 4 | RES 470 OHM 1/8W 0805 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 1 | RES 100K OHM 1/8W 0805 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 4 | RES 390 OHM 1/8W 0805 390 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R9 |
| 1 | RES 22K OHM 1/8W 0805 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
430Badge design files
The KiCad project lives in the eeproto/430Badge repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/Badge.kicad_pcb
- Schematickicad/Badge.kicad_sch
430Badge: common questions
How big is the 430Badge PCB?
The 430Badge measures 111.9 × 53 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 430Badge?
24 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the 430Badge design files?
From the eeproto/430Badge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 430Badge design in my own project?
The repository has no license, so all rights stay with eeproto. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k