DZ SAPR
efimova-d·DZ_SAPR
About the DZ SAPR PCB
DZ SAPR is an open source STM32 PCB design by efimova-d, published on GitHub. It is a 2-layer board measuring 55.5 × 34.5 mm, with 47 components from 27 distinct parts.
Its main chip is the STM32F3DISCOVERY, from the STM32 family. By type, the board carries 18 resistors, 11 capacitors, 3 crystals and 1 module.
From the project
Выполнила: Ефимова Д.С., группа БМТ2-31М, МГТУ им. Н.Э. Баумана Проверил: Рязанцев П. САПР: KiCad 10
Выполнила: Ефимова Д.С., группа БМТ2-31М, МГТУ им. Н.Э. Баумана Проверил: Рязанцев П. САПР: KiCad 10
- Состав: библиотека GOSTESKD содержит 22 символа (УГО по ГОСТ ЕСКД) и 12 посадочных мест. - Подключение: библиотека подключена как git-сабмодуль в lib/GOSTESKD. - Пути: относительные, в sym-lib-table и fp-lib-table проекта: ${KIPRJMOD}/lib/GOSTESKD/GOSTESKD.kicadsym и ${KIPRJMOD}/lib/GOSTESKD/GOSTESKD.pretty. - Размеры УГО соответствуют ГОСТ 2.728, 2.730, 2.736, 2.743, 2.755 и 2.759. - Линии УГО той же толщины, что линии связи (ГОСТ 2.721). - Шрифт** — ГОСТ тип Б, выводы на сетке 2,54 мм.
DZ SAPR bill of materials (BOM)
47 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | QX-4A - | PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | 61300311121 Электроды Würth Elektronik | PinHeader_1x03_P2.54mm_Vertical | X1 |
| 1 | 61300211121 Conn_01x02_Pin Würth Elektronik | PinHeader_1x02_P2.54mm_Vertical | X2 |
| 1 | 61300311121 Conn_01x03_Pin Würth Elektronik | PinHeader_1x03_P2.54mm_Vertical | X3 |
| 1 | DS18B20+ DS18B20 Analog Devices | TO-92_Inline | BK1 |
| 3 | 30-81794 FSR402 Interlink Electronics | PinHeader_1x02_P2.54mm_Vertical | BP1, BP2, BP3 |
| 1 | PKLCS1212E4001-R1 Buzzer Murata | Buzzer_Murata_PKLCS1212E | BQ1 |
| 1 | AD620ARZ AD620 Analog Devices | SO-8_3.9x4.9mm_P1.27mm | DA1 |
| 1 | TL074CDR TL074 Texas Instruments | SO-14_3.9x8.65mm_P1.27mm | DA2 |
| 1 | STM32F3DISCOVERY STMicroelectronics | PinHeader_1x10_P2.54mm_Vertical | DD1 |
| 1 | FS5106B FS5106 Feetech | PinHeader_1x03_P2.54mm_Vertical | DD2 |
| 2 | 1N4148 onsemi | D_DO-35_SOD27_P7.62mm_Horizontal | VD1, VD2 |
| 1 | 2Д204А 2D204A - | D_DO-35_SOD27_P7.62mm_Horizontal | VD3 |
| 2 | IRLZ34NPBF IRLZ34N Infineon Technologies | TO-220-3_Vertical | VT1, VT2 |
| 2 | CL21B105KBFNNNE 1мк Samsung Electro-Mechanics | C_0805_2012Metric | C1, C4 |
| 1 | CL21B103KBANNNC 0.01мк Samsung Electro-Mechanics | C_0805_2012Metric | C2 |
| 6 | C0805X824K3RACAUTO 0,82мк KEMET | C_0805_2012Metric | C3, C5, C6, C7, C8, C10 |
| 2 | CL21B104KBCNNNC 100н Samsung Electro-Mechanics | C_0805_2012Metric | C9, C11 |
| 2 | RC0805FR-0782KL 82k Yageo | R_0805_2012Metric | R1, R7 |
| 5 | RC0805FR-07150KL 150k Yageo | R_0805_2012Metric | R2, R3, R4, R6, R10 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3266W-1-103LF 10к Bourns | Potentiometer_Bourns_3266W_Vertical | R5 |
| 1 | RC0805FR-07200RL 200 Yageo | R_0805_2012Metric | R8 |
| 1 | RC0805FR-071KL 1k Yageo | R_0805_2012Metric | R9 |
| 4 | RC0805FR-073K3L 3,3к Yageo | R_0805_2012Metric | R11, R12, R16, R17 |
| 1 | RC0805FR-074K7L 4,7к Yageo | R_0805_2012Metric | R13 |
| 2 | RC0805FR-071KL 1к Yageo | R_0805_2012Metric | R14, R15 |
| 1 | RC0805FR-0710KL 10к Yageo | R_0805_2012Metric | R18 |
DZ SAPR design files
The KiCad project lives in the efimova-d/DZ_SAPR repository on GitHub; these links point at the commit this page was built from.
- LayoutDZ_SAPR.kicad_pcb
- SchematicDZ_SAPR.kicad_sch
DZ SAPR: common questions
What microcontroller does the DZ SAPR use?
The DZ SAPR is built around the STM32F3DISCOVERY, from the STM32 family.
How big is the DZ SAPR PCB?
The DZ SAPR measures 55.5 × 34.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DZ SAPR?
47 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the DZ SAPR design files?
From the efimova-d/DZ_SAPR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DZ SAPR design in my own project?
The repository has no license, so all rights stay with efimova-d. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DZ SAPR without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k