Ele713
eliftplgl·ELE713-Two-Switch-Flyback·PCB/ele713/ele713.kicad_pcb
About the Ele713 PCB
Ele713 is an open source PCB design by eliftplgl, published on GitHub. It is a 2-layer board measuring 225.7 × 84.2 mm, with 96 components from 57 distinct parts.
Other key parts include the LM5012, LT8304, UCC28C55, ISOM8110 and TL431DBZ. By type, the board carries 43 capacitors, 27 resistors, 8 diodes, 6 ICs, 4 transistors and 2 connectors.
Main components on the Ele713
Ele713 bill of materials (BOM)
96 components, 57 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM5012 | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U1 |
| 1 | LT8304 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2 |
| 1 | UCC28C55 | VSSOP-8_3x3mm_P0.65mm | U3 |
| 1 | ISOM8110 | SOIC-4_4.55x3.7mm_P2.54mm | U4 |
| 1 | TL431DBZ | SOT-23 | U5 |
| 1 | 2EDB8259F | SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | PMBT2222A-Q | SOT-23_Handsoldering | Q1 |
| 1 | PMBT2907A-Q | SOT-23_Handsoldering | Q2 |
| 2 | BSC096N10LS5 | TDSON-8-1 | Q3, Q4 |
| 2 | Conn_01x02_Pin | TerminalBlock_RND_205-00067_1x02_P7.50mm_Horizontal | J1, J2 |
| 1 | SC-18-10J | SC1810J | PS1 |
| 1 | 750315126 Vi = 36-72V, Vo = 12V / 1.25A Wurth Elektronik | WE-FLYLT_EP13_L13.46W17.75H12.70 | T1 |
| 1 | ELE713 Transformer | ETD39_coilformer | T2 |
| 1 | CMZ5944B | D_SMA_Handsoldering | Z1 |
| 1 | BZX84-A10,215 | SOT-23_Handsoldering | Z2 |
| 3 | SDT5H100LP5 | D_PowerDI-5 | D1, D5, D6 |
| 1 | PMEG6030EP | D_SOD-128 | D2 |
| 1 | DFLS1150 | D_PowerDI-123 | D3 |
| 1 | V35PWL63 | TO-252-2 | D4 |
| 2 | BZT52H-A18-QX | D_SOD-123F | D7, D8 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 68u | L_Coilcraft_MSS1210-XXX | L1 |
| 1 | 47p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 2.2n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5 |
| 9 | 22u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3, C6, C13, C14, C15, C36, C37, C38 +1 |
| 12 | 4.7u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C4, C7, C8, C9, C11, C12, C17, C18 +4 |
| 2 | 10u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C10, C16 |
| 1 | 220p | R76QD0220SE00J | C19 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C27 |
| 1 | 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 6.8n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 2 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23, C24 |
| 1 | 470p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 100p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26 |
| 2 | 22u | CP_Radial_D10.0mm_P5.00mm | C28, C29 |
| 2 | 3.3u | R46KN410050N1K | C30, C31 |
| 2 | 2.2u | F861KM473M310A | C40, C41 |
| 2 | 220u | CAPAE830X1250N | C42, C43 |
| 2 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 3 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R26, R27 |
| 1 | 453k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 49.9k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 88.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R11, R20 |
| 1 | 237k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 100R | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R9 |
| 1 | 4m | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R10 |
| 1 | 1.1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 12k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 3.83k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 16.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 4.99k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18 |
| 1 | 680R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 39k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 9.53k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 2.49k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 2 | 10R | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R24, R25 |
Ele713 design files
The KiCad project lives in the eliftplgl/ELE713-Two-Switch-Flyback repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/ele713/ele713.kicad_pcb
- SchematicPCB/ele713/ele713.kicad_sch
Ele713: common questions
How big is the Ele713 PCB?
The Ele713 measures 225.7 × 84.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ele713?
96 components, from 57 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ele713 design files?
From the eliftplgl/ELE713-Two-Switch-Flyback repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ele713 design in my own project?
The repository has no license, so all rights stay with eliftplgl. Use it as a reference, and ask the author before reusing the design.