Plinkyblackfront
About the Plinkyblackfront PCB
Plinkyblackfront is an open source PCB design by ember-labs-io, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 121.9 × 128.3 mm, with 76 components from 7 distinct parts.
By type, the board carries 72 diodes and 4 connectors.
From the project
Plinky Firmware - Lucky Phoenix Edition, custom firmware for Plinky and Plinky+
Stijn from This Is Not Rocket Science routed the original Version 3. Steve / Okyreon from denki oto added the LPZW midi circuit to allow plinky to have on-board midi without the expander. Kay** from LPZW Modules then contributed a circuit to fix the input noise, and then polished everything into a 'Version 3.1', which is the current version linked here. Kay also was one of the original people who helped me with the hardware design of V1 and V2.
Plinkyblackfront bill of materials (BOM)
76 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X08_ODD_EVEN Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical_SMD | J1 |
| 1 | AUDIOJACK2_SWITCHT Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical_SMD | J2 |
| 1 | AUDIOJACK2_SWITCHT Conn_02x08_Top_Bottom | touchy7 | J3 |
| 1 | CONN_02X05_ODD_EVEN Conn_01x02 | touchy7horiz | J4 |
| 4 | LED_DUAL_2PIN LED | led_reverse | D1, D2, D3, D4 |
| 60 | LED | led_reverse | D5, D6, D7, D8, D9, D10, D11, D12 +52 |
| 8 | BLUE | led_reverse | D65, D66, D67, D68, D69, D70, D71, D72 |
Plinkyblackfront design files
The KiCad project lives in the ember-labs-io/Plinky_LPE repository on GitHub; these links point at the commit this page was built from.
Plinkyblackfront: common questions
How big is the Plinkyblackfront PCB?
The Plinkyblackfront measures 121.9 × 128.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plinkyblackfront?
76 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Plinkyblackfront design files?
From the ember-labs-io/Plinky_LPE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Plinkyblackfront design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ember-labs-io chose for the repository.
More boards in Plinky_LPE
STM32Plinkyblack hwmidi jacks
121.9 × 109.2 mm261 parts4LCC-BY-SA-4.019
Testjig
157.5 × 115.8 mm79 parts2LCC-BY-SA-4.019
Plinky front osh
121.9 × 128.3 mm76 parts2LCC-BY-SA-4.019
Plinkyblackfront bigholes
121.9 × 128.3 mm76 parts2LCC-BY-SA-4.019
Xyab
43.2 × 128.3 mm68 parts2LCC-BY-SA-4.019