MCP3208
About the MCP3208 PCB
MCP3208 is an open source PCB design by ergeha, published on GitHub. It is a board measuring 52.3 × 29.7 mm, with 29 components from 20 distinct parts.
Other key parts include the MCP1541, MCP6021 and MCP3208. By type, the board carries 12 capacitors, 7 resistors, 6 connectors, 3 ICs and 1 inductor.
Main components on the MCP3208
MCP3208 bill of materials (BOM)
29 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1541 | SOT-23_Handsoldering_MCP | U1 |
| 1 | MCP6021 | SOIC-8_MCP_HandSolder | U2 |
| 1 | MCP3208 | SOIC-16_MCP_HandSolder | U3 |
| 1 | 5V | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SPI | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CH4 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | CH3 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | CH2 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | CH1 | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | 21Ω @ 1MHz | FIL_NFZ32BW210HN11L_HandSolder | FB1 |
| 1 | 0.1µF | CP_Elec_4x4.5_HandSolder | C1 |
| 1 | 1000pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22µF | CP_Elec_5x5.3_HandSolder | C3 |
| 1 | 0.1µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 10µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 3 | 1µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8 |
| 4 | 47µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C12 |
| 1 | 10kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 1kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 4 | 68kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7 |
MCP3208 design files
The KiCad project lives in the ergeha/UG_MKII repository on GitHub; these links point at the commit this page was built from.
MCP3208: common questions
How big is the MCP3208 PCB?
The MCP3208 measures 52.3 × 29.7 mm and is 1.6002 mm thick.
How many components are on the MCP3208?
29 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MCP3208 design files?
From the ergeha/UG_MKII repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the MCP3208 design in my own project?
The repository has no license, so all rights stay with ergeha. Use it as a reference, and ask the author before reusing the design.
