Iasserv
About the Iasserv PCB
Iasserv is an open source PCB design by EsialRobotik, published on GitHub. It is a 4-layer board measuring 72.1 × 77 mm, with 20 components from 16 distinct parts.
By type, the board carries 18 connectors and 2 resistors.
Iasserv bill of materials (BOM)
20 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SRF03 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | SRF03 SRF04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | C158012 Couleur | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | C158012 Tirette | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 2 | NUCLEO-G431KB Nucleo-G431KB | PinHeader_1x15_P2.54mm_Vertical | J5, J6 |
| 1 | SRF03 Codeur1 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | C158012 Batterie | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | SRF03 Codeur2 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | SRF03 SRF02 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | SRF03 SRF01 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J11 |
| 1 | SRF03 I2C | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J12 |
| 1 | SRF03 MD22 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J13 |
| 1 | C165948 Connector, USB-TYPE-C-16P | TYPE-C-SMD_HX-TYPE-C-16PIN | J14 |
| 2 | SPARKFUN-BOB-12009-1 Sparkfun-BOB-12009-1 | PinHeader_1x06_P2.54mm_Vertical | J15, J16 |
| 2 | SPARKFUN-BOB-12009-1 Sparkfun-BOB-12009-2 | PinHeader_1x06_P2.54mm_Vertical | J17, J18 |
| 2 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R7, R8 |
Iasserv design files
The KiCad project lives in the EsialRobotik/Electronique repository on GitHub; these links point at the commit this page was built from.
Iasserv: common questions
How big is the Iasserv PCB?
The Iasserv measures 72.1 × 77 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Iasserv?
20 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Iasserv design files?
From the EsialRobotik/Electronique repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Iasserv design in my own project?
The repository has no license, so all rights stay with EsialRobotik. Use it as a reference, and ask the author before reusing the design.
