7x4x2
eswai·7x4x2
About the 7x4x2 PCB
7x4x2 is an open source PCB design by eswai, published on GitHub under the MIT license. It is a 2-layer board measuring 151 × 76 mm, with 39 components from 9 distinct parts.
Other key parts include the BL652_LEFT. By type, the board carries 29 relays, 3 connectors, 2 switches, 2 diodes, 2 capacitors and 1 IC.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
7x4x2 - wireless split ortholinear keyboard
7x4x2 (seven-four-two)はBluetooth対応の左右分割式、格子配列のキーボードです。 本キーボードはSatT氏が設計されたCaravelleの公開情報を活用させていただき、主にキーの配列を変更したものです。 SatT氏のご厚意に感謝いたします。
- タカチ電機工業 BK型コイン電池ホルダー BK-869 - 電池 CR1632 - マイコン Laird BL652-SA-01-T/R - チップ積層セラミックコンデンサー 100μF6.3V X6R 3216 - チップ積層セラミックコンデンサー 0.1μF50V F 2012 - 表面実装用ショットキーバリアダイオード (40V2A)SS2040FL - 小型スライドスイッチ 1回路2接点(面実装タイプ) SSW1P2T-SMT - アルプス電気 (ALPS) 表面実装タクトスイッチ 5.2mm角薄型タイプ SKQGAFE010 - スタンドオフ M2 6.5mm ARB-2006.5E - ネジ M2x5mm - Cherry MXスイッチ - MXスイッチ用ソケット

Main components on the 7x4x2
7x4x2 bill of materials (BOM)
39 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BL652_LEFT | Laird_BL652_Hand | U1 |
| 1 | Conn_01x04 | programming_port | J2 |
| 2 | Conn_01x02_Female | BK-869 | J3, J4 |
| 29 | keyboard_parts_KEYSW | CherryMX_Hotswap | K1, K2, K3, K4, K5, K6, K7, K8 +21 |
| 1 | RESET_SW | SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | SW_SPDT | 679-1847-1-ND | SW2 |
| 2 | D | D_SOD-123 | D1, D2 |
| 1 | 0.1uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 100uF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
7x4x2 design files
The KiCad project lives in the eswai/7x4x2 repository on GitHub; these links point at the commit this page was built from.
- Layout7x4x2-pcb.kicad_pcb
7x4x2: common questions
How big is the 7x4x2 PCB?
The 7x4x2 measures 151 × 76 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 7x4x2?
39 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the 7x4x2 design files?
From the eswai/7x4x2 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 7x4x2 design in my own project?
Yes, under the terms of its MIT license, which eswai chose for the repository.