Tree
About the Tree PCB
Tree is an open source PCB design by extsui, published on GitHub under the MIT license. It is a 2-layer board measuring 68 × 100 mm, with 26 components from 6 distinct parts.
Other key parts include the HT16K33-28SOP. By type, the board carries 20 diodes, 3 resistors, 1 IC, 1 connector and 1 capacitor.
From the project
KawaiiMakeMYBoard
Main components on the Tree
Tree bill of materials (BOM)
26 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HT16K33-28SOP | SOIC-28W_7.5x18.7mm_P1.27mm | U1 |
| 1 | Conn_01x05 | EDAC_5P_P2.54mm | J1 |
| 19 | LED | LED_1608_HandSolderingCustom | D1, D2, D3, D4, D5, D6, D7, D8 +11 |
| 1 | D | LED_1608_HandSolderingCustom | D20 |
| 1 | 0.1u | C_1608_HandSolderingCustom | C1 |
| 3 | 39k | R_1608_HandSolderingCustom | R1, R2, R3 |
Tree design files
The KiCad project lives in the extsui/GardeningBoard repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Tree/Tree.kicad_pcb
Tree: common questions
How big is the Tree PCB?
The Tree measures 68 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tree?
26 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tree design files?
From the extsui/GardeningBoard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Tree design in my own project?
Yes, under the terms of its MIT license, which extsui chose for the repository.
More boards in GardeningBoard
Land
100 × 100 mm38 parts2LMIT0
House
95 × 60.5 mm34 parts2LMIT0
Tile
100 × 86.6 mm31 parts2LMIT0
STM32Ground
100 × 86.6 mm25 parts2LMIT0
Building
59.7 × 113.5 mm25 parts2LMIT0
Pillar
100 × 86.6 mm22 parts2LMIT0
Grass
60 × 35.5 mm18 parts2LMIT0
ESP32Fountain
100 × 86.6 mm14 parts2LMIT0
Base
100 × 100 mm5 parts2LMIT0