Team board
eyallampel1·team_board·flight_controller/STM32H7.kicad_sch
About the Team board
Team board is an open source STM32 PCB design by eyallampel1, published on GitHub. It is a board, with 57 components from 15 distinct parts.
Its main chip is the STM32H743IIT6, from the STM32 family. Other key parts include the HB-PH9-12727PB2GOB. By type, the board carries 26 capacitors, 13 resistors, 12 test points, 2 ICs, 2 diodes and 1 crystal.
Main components on the Team board
Team board bill of materials (BOM)
57 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H743IIT6 | LQFP-176_L24.0-W24.0-P0.50-LS26.0-BL | U1 |
| 1 | HB-PH9-12727PB2GOB | HDR-SMD_14P-P1.27-V-M-R2-C7-LS5.5 | U6 |
| 1 | XL2EL89CLI-111YLC-16M | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X2 |
| 1 | 6.0*6.0*6.0 | SW-SMD_4P-L6.0-W6.0-P4.50-LS8.6 | SW2 |
| 12 | TestPoint | TestPoint_Pad_2.0x2.0mm | TP1, TP3, TP4, TP6, TP7, TP8, TP9, TP10 +4 |
| 1 | 0603 Green 509-620mcd | LED0603-RD | D5 |
| 1 | KT-0603R | LED0603-RD | D12 |
| 2 | CC0603JRNPO9BN100 (10pF , 0603 ,50V ,X7R) | C0603 | C1, C2 |
| 18 | CC0603KRX7R9BB104 (100nf , 0603 ,50v ,X7R) | C0603 | C3, C4, C5, C6, C9, C20, C21, C22 +10 |
| 1 | CL10A475KO8NNNC (4.7uf , 0603 ,16v ,X5R) | C0603 | C11 |
| 2 | CL10A225KO8NNNC (2.2uf , 0603,16v,X5R) | C0603 | C12, C13 |
| 3 | CL10B105KA8NNNC (1uf ,0603 ,25v ,X7R) | C0603 | C14, C15, C16 |
| 3 | 603WAF1000T5E (100ohm , 0603) | R0603 | R2, R58, R59 |
| 1 | 603WAF0000T5E (0ohm , 0603) | R0603 | R7 |
| 9 | 0603WAF1002T5E | R0603 | R66, R67, R68, R69, R70, R71, R73, R106 +1 |
Team board design files
The KiCad project lives in the eyallampel1/team_board repository on GitHub; these links point at the commit this page was built from.
- Schematicflight_controller/STM32H7.kicad_sch
Team board: common questions
What microcontroller does the Team board use?
The Team board is built around the STM32H743IIT6, from the STM32 family.
How many components are on the Team board?
57 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Team board design files?
From the eyallampel1/team_board repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Team board design in my own project?
The repository has no license, so all rights stay with eyallampel1. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Team board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k