Unicorne (MX hotswap)
EyalYe·unicorne
About the Unicorne (MX hotswap) PCB
Unicorne (MX hotswap) is an open source PCB design by EyalYe, published on GitHub. It is a 2-layer board measuring 293.4 × 118.8 mm, with 153 components from 58 distinct parts.
Other key parts include the nice!nano v2 and SN74LV1T125. By type, the board carries 54 LEDs, 44 switches, 42 diodes, 5 resistors, 2 ICs and 2 transistors.
It belongs with the keyboards and power & battery designs in this gallery.
From the project
A unibody Corne: both halves of the Corne v3 key layout on one PCB, each half rotated 16°, with an Azoteq TPS43 trackpad in the middle (it sits on the case, over the nice!nano) and a nice!nano v2 at the top.
A unibody Corne: both halves of the Corne v3 key layout on one PCB, each half rotated 16°, with an Azoteq TPS43 trackpad in the middle (it sits on the case, over the nice!nano) and a nice!nano v2 at the top.
Status: layout fixed, schematic done, MX and Choc boards fully routed (DRC: 0 unconnected, 0 copper violations).
- 42 keys (3×6 + 3 thumbs per half), outer pinky columns break off for a 36-key board - Key spacing, stagger, thumb cluster and LED positions copied from crkbd v3-final (19.0 mm pitch) - Two board versions with the same placement: Kailh MX hotswap, and Kailh Choc hotswap…

Main components on the Unicorne (MX hotswap)
Unicorne (MX hotswap) bill of materials (BOM)
153 components, 58 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nice!nano v2 | nice_nano | U1 |
| 1 | SN74LV1T125 | SOT-23-5_HandSoldering | U2 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 2N7002 | SOT-23 | Q2 |
| 1 | Expansion | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | GPIO | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | R0C0 | SW_Hotswap_Kailh_MX_1.00u | SW1 |
| 1 | R0C1 | SW_Hotswap_Kailh_MX_1.00u | SW2 |
| 1 | R0C2 | SW_Hotswap_Kailh_MX_1.00u | SW3 |
| 1 | R0C3 | SW_Hotswap_Kailh_MX_1.00u | SW4 |
| 1 | R0C4 | SW_Hotswap_Kailh_MX_1.00u | SW5 |
| 1 | R0C5 | SW_Hotswap_Kailh_MX_1.00u | SW6 |
| 1 | R1C0 | SW_Hotswap_Kailh_MX_1.00u | SW7 |
| 1 | R1C1 | SW_Hotswap_Kailh_MX_1.00u | SW8 |
| 1 | R1C2 | SW_Hotswap_Kailh_MX_1.00u | SW9 |
| 1 | R1C3 | SW_Hotswap_Kailh_MX_1.00u | SW10 |
| 1 | R1C4 | SW_Hotswap_Kailh_MX_1.00u | SW11 |
| 1 | R1C5 | SW_Hotswap_Kailh_MX_1.00u | SW12 |
| 1 | R2C0 | SW_Hotswap_Kailh_MX_1.00u | SW13 |
| 1 | R2C1 | SW_Hotswap_Kailh_MX_1.00u | SW14 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R2C2 | SW_Hotswap_Kailh_MX_1.00u | SW15 |
| 1 | R2C3 | SW_Hotswap_Kailh_MX_1.00u | SW16 |
| 1 | R2C4 | SW_Hotswap_Kailh_MX_1.00u | SW17 |
| 1 | R2C5 | SW_Hotswap_Kailh_MX_1.00u | SW18 |
| 1 | R0C6 | SW_Hotswap_Kailh_MX_1.00u | SW19 |
| 1 | R1C6 | SW_Hotswap_Kailh_MX_1.00u | SW20 |
| 1 | R2C6 | SW_Hotswap_Kailh_MX_1.50u | SW21 |
| 1 | R3C0 | SW_Hotswap_Kailh_MX_1.00u | SW22 |
| 1 | R3C1 | SW_Hotswap_Kailh_MX_1.00u | SW23 |
| 1 | R3C2 | SW_Hotswap_Kailh_MX_1.00u | SW24 |
| 1 | R3C3 | SW_Hotswap_Kailh_MX_1.00u | SW25 |
| 1 | R3C4 | SW_Hotswap_Kailh_MX_1.00u | SW26 |
| 1 | R3C5 | SW_Hotswap_Kailh_MX_1.00u | SW27 |
| 1 | R4C0 | SW_Hotswap_Kailh_MX_1.00u | SW28 |
| 1 | R4C1 | SW_Hotswap_Kailh_MX_1.00u | SW29 |
| 1 | R4C2 | SW_Hotswap_Kailh_MX_1.00u | SW30 |
| 1 | R4C3 | SW_Hotswap_Kailh_MX_1.00u | SW31 |
| 1 | R4C4 | SW_Hotswap_Kailh_MX_1.00u | SW32 |
| 1 | R4C5 | SW_Hotswap_Kailh_MX_1.00u | SW33 |
| 1 | R5C0 | SW_Hotswap_Kailh_MX_1.00u | SW34 |
| 1 | R5C1 | SW_Hotswap_Kailh_MX_1.00u | SW35 |
| 1 | R5C2 | SW_Hotswap_Kailh_MX_1.00u | SW36 |
| 1 | R5C3 | SW_Hotswap_Kailh_MX_1.00u | SW37 |
| 1 | R5C4 | SW_Hotswap_Kailh_MX_1.00u | SW38 |
| 1 | R5C5 | SW_Hotswap_Kailh_MX_1.00u | SW39 |
| 1 | R3C6 | SW_Hotswap_Kailh_MX_1.00u | SW40 |
| 1 | R4C6 | SW_Hotswap_Kailh_MX_1.00u | SW41 |
| 1 | R5C6 | SW_Hotswap_Kailh_MX_1.50u | SW42 |
| 1 | Power | SW_SPDT_Shouhan_MSK12C02 | SW43 |
| 1 | Reset | SW_Tactile_SPST_3.5x6mm_H4.3mm_THT | SW44 |
| 42 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED1, LED2, LED3, LED5, LED6, LED7, LED9, LED10 +34 |
| 12 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | LED4, LED8, LED11, LED13, LED18, LED23, LED26, LED29 +4 |
| 42 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +34 |
| 1 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 2 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
Unicorne (MX hotswap) design files
The KiCad project lives in the EyalYe/unicorne repository on GitHub; these links point at the commit this page was built from.
- Layoutunicorne.kicad_pcb
- Schematicunicorne.kicad_sch
- BOMdocs/led-map.md
Unicorne (MX hotswap): common questions
How big is the Unicorne (MX hotswap) PCB?
The Unicorne (MX hotswap) measures 293.4 × 118.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Unicorne (MX hotswap)?
153 components, from 58 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Unicorne (MX hotswap) design files?
From the EyalYe/unicorne repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Unicorne (MX hotswap) design in my own project?
The repository has no license, so all rights stay with EyalYe. Use it as a reference, and ask the author before reusing the design.