HardLabs

Sweep squared rot

ezxzeng·sweep_squared_rot·routed_pcb/mx_gateron_lp_hotswap/board.kicad_pcb

Sweep squared rot PCB layout, top view — open source board by ezxzeng

About the Sweep squared rot PCB

Sweep squared rot is an open source PCB design by ezxzeng, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 25 components from 7 distinct parts.

By type, the board carries 18 switches, 2 transformers, 1 IC and 1 LED.

It belongs with the keyboards designs in this gallery.

From the project

Generated keyboard

Please do not rely on the autogenerated files and double check them manually before sending them off to a PCB fab. The author and other random strangers on the internet have been able to produce working keyboard prototypes from this repo; this does not mean that everything will work every time.

The author(s) waive(s) responsibility for any damage or regulatory violations caused by using this software (see license). Please consult your local regulations around radio frequencies and what's allowed for DIY projects in your country.

Sweep squared rot, from the project README
From the project README

Sweep squared rot bill of materials (BOM)

25 components, 7 distinct parts.

QtyPartRefs
1
~
MCU1
1
~
B1
1
~
B2
18
~
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +10
2
~
T1, T2
1
TRRS-PJ-320A-dual
TRRS1
1
~
JST1

Sweep squared rot design files

The KiCad project lives in the ezxzeng/sweep_squared_rot repository on GitHub; these links point at the commit this page was built from.

Sweep squared rot: common questions

How big is the Sweep squared rot PCB?

The Sweep squared rot measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sweep squared rot?

25 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sweep squared rot design files?

From the ezxzeng/sweep_squared_rot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sweep squared rot design in my own project?

Yes, under the terms of its MIT license, which ezxzeng chose for the repository.

Similar boards