Wireless esp32-cam
F45c·wireless-esp32-cam·pcb-files/wireless-esp32-cam-fixed.kicad_pcb
About the Wireless esp32-cam PCB
Wireless esp32-cam is an open source PCB design by F45c, published on GitHub. It is a 2-layer board measuring 55 × 75 mm, with 5 components from 5 distinct parts.
By type, the board carries 4 connectors and 1 IC.
It belongs with the iot & wireless designs in this gallery.
From the project
Wireless Esp32-Camera using nRF24l01+
I'm building a wireless esp32 camera that uses the 2.4 GHZ RF chip nRF24l01+ to transmit the images over a greater distance than just WIFI. Using the Ebyte E01 2G4M27D Module achieving distances up to 3000 meters, I can receive images and change the resolution and quality of the captures from the receiver side.
My Wifi signal doesn't cover my entire property so I figured I will build a security camera that has a higher distance and can be placed on the edge where no normal camera would get a connection. Also, out on my field, I can monitor all my stuff that's stored there from home and watch…

Wireless esp32-cam bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | solder-pad | U1 |
| 1 | pins-left | PinSocket_1x20_P2.54mm_Vertical | J1 |
| 1 | pins-right | PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J4 |
Wireless esp32-cam design files
The KiCad project lives in the F45c/wireless-esp32-cam repository on GitHub; these links point at the commit this page was built from.
Wireless esp32-cam: common questions
How big is the Wireless esp32-cam PCB?
The Wireless esp32-cam measures 55 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wireless esp32-cam?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wireless esp32-cam design files?
From the F45c/wireless-esp32-cam repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wireless esp32-cam design in my own project?
The repository has no license, so all rights stay with F45c. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547