Loaf ESPT
feastorg·Loaf_ESPT·hardware/BREAD_Loaf.kicad_pcb
About the Loaf ESPT PCB
Loaf ESPT is an open source PCB design by feastorg, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30.6 × 50 mm, with 23 components from 12 distinct parts.
Other key parts include the AP63205WU-7, LTC4311ISC6-TRMPBF and ThingPlus. By type, the board carries 9 resistors, 4 capacitors, 3 ICs, 3 transistors, 1 connector and 1 diode.
From the project
ESP32 Thing Plus Controller
ESP32 Thing Plus controller Loaf for building a BREAD from compatible Slices.
This Loaf serves as the supervisory controller and interconnect for one or more Slices. The design includes bus connectors, an ESP32 Thing Plus, a 12V to 5V regulator, 3.3V to 5V logic level shifting, and I2C level shifting and acceleration.
[Explain how to use the project. Include examples and screenshots if applicable.]
Main components on the Loaf ESPT
Loaf ESPT bill of materials (BOM)
23 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63205WU-7 | SOIC_05WU-7_DIO | U1 |
| 1 | LTC4311ISC6-TRMPBF | SOT-6_SC_LIT | U2 |
| 1 | ThingPlus | ThingPlus_With_Connectors | U3 |
| 3 | BSS138 | SOT-23 | Q1, Q2, Q3 |
| 1 | Conn_01x10_Socket | PinSocket_1x10_P2.54mm_Horizontal | J3 |
| 1 | Heatsink_Pad | Thermal_Pad | HS1 |
| 1 | WS2812B_5050 | WS2812-5050-4PIN | D1 |
| 1 | 4.7uH | L_1210_3225Metric | L1 |
| 3 | 22uF | C_1206_3216Metric | C1, C3, C4 |
| 1 | 100nF | C_1206_3216Metric | C2 |
| 7 | 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7 |
| 2 | 2.2k | R_0603_1608Metric | R8, R9 |
Loaf ESPT design files
The KiCad project lives in the feastorg/Loaf_ESPT repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/BREAD_Loaf.kicad_pcb
- Schematichardware/BREAD_Loaf.kicad_sch
Loaf ESPT: common questions
How big is the Loaf ESPT PCB?
The Loaf ESPT measures 30.6 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Loaf ESPT?
23 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Loaf ESPT design files?
From the feastorg/Loaf_ESPT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Loaf ESPT design in my own project?
Yes, under the terms of its GPL-3.0 license, which feastorg chose for the repository.