Gimbal 3DOF

firiusz123·Gimbal_3DOF·kicad_gimbal_schematics/gimbal/gimbal.kicad_pcb

Gimbal 3DOF PCB layout, top view — open source STM32 board by firiusz123

About the Gimbal 3DOF PCB

Gimbal 3DOF is an open source STM32 PCB design by firiusz123, published on GitHub. It is a 2-layer board measuring 41.9 × 38.3 mm, with 30 components from 22 distinct parts.

Its main chip is the STM32G431CBTx, from the STM32 family. Other key parts include the LT1761-3.3 and SN74LV1T34DBV. By type, the board carries 14 capacitors, 4 ICs, 3 modules, 3 connectors, 2 switches and 2 resistors.

It belongs with the robotics & motion, power & battery and sensors designs in this gallery.

From the project

Gimbal 3DOF is a three-axis camera stabilization system (pitch, roll, yaw) designed for integration with drones and small aerial platforms. The goal of the project was to create a modular, lightweight, energy-efficient gimball, for the Project classes of AGH university of science

Gimbal 3DOF is a three-axis camera stabilization system (pitch, roll, yaw) designed for integration with drones and small aerial platforms. The goal of the project was to create a modular, lightweight, energy-efficient gimball, for the Project classes of AGH university of science and technology course , Mechatronic Design . The system uses an IMU and servos, controlled by an STM32 microcontroller in the custom PCB , and by Arduino Mega within the prototype , both running with FreeRTOS. A Python-based graphical user interface (GUI) is also provided for testing and interaction. The working…

Gimbal 3DOF, from the project README
From the project README

Main components on the Gimbal 3DOF

Gimbal 3DOF bill of materials (BOM)

30 components, 22 distinct parts.

QtyPartRefs
1
STM32G431CBTx
U1
1
LT1761-3.3
U2
2
SN74LV1T34DBV
U3, U4
3
Motor_Servo
M1, M2, M3
1
8 MHz
Y1
1
Conn_01x04_Pin_IMU
J1
1
Conn_01x04_Pin_input_cable
J2
1
SWD
J3
1
SW_Slide_DPDT
SW1
1
SW_Push
SW3
1
D
D1
3
C
C1, C2, C3
3
100nF
C4, C5, C6
1
4.7 μF
C7
1
10 nF
C8
1
1 μF
C9
1
100 nF
C10
1
+1 μF
C11
2
10 pF
C12, C13
1
C
C14
Show 2 more
QtyPartRefs
1
45Ω
R1
1
1.25 KΩ
R2

Gimbal 3DOF design files

The KiCad project lives in the firiusz123/Gimbal_3DOF repository on GitHub; these links point at the commit this page was built from.

Gimbal 3DOF: common questions

What microcontroller does the Gimbal 3DOF use?

The Gimbal 3DOF is built around the STM32G431CBTx, from the STM32 family.

How big is the Gimbal 3DOF PCB?

The Gimbal 3DOF measures 41.9 × 38.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gimbal 3DOF?

30 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gimbal 3DOF design files?

From the firiusz123/Gimbal_3DOF repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gimbal 3DOF design in my own project?

The repository has no license, so all rights stay with firiusz123. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Gimbal 3DOF without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards