NR1B-ST56
About the NR1B-ST56 PCB
NR1B-ST56 is an open source PCB design by Flanagan-Lab-Neutron-Detector, published on GitHub. It is a 4-layer board measuring 70.5 × 134 mm, with 40 components from 17 distinct parts.
Other key parts include the S29GL01GP, DG419LDY, OPA189ID and NCV7809. By type, the board carries 15 resistors, 8 diodes, 8 capacitors, 5 ICs, 3 connectors and 1 jumper.
From the project
NISoC Readout 1 Socket-TSOP56 Board
Main components on the NR1B-ST56
NR1B-ST56 bill of materials (BOM)
40 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | S29GL01GP | Socket_TSOP-56 | U1 |
| 1 | DG419LDY | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | OPA189ID | SOIC-8_3.9x4.9mm_P1.27mm | U3, U5 |
| 1 | NCV7809 | TO-263-3_TabPin2 | U4 |
| 2 | 0.1" Female Long Tail | PinHeader_2x04_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Jumper_3_Bridged12 | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 4 | S1G | D_SMA | D3, D5, D7, D9 |
| 1 | 5.1V | D_SOD-323 | D4 |
| 1 | 15V | D_SOD-323 | D6 |
| 2 | 18V | D_SOD-323 | D8, D10 |
| 6 | 0.1uF | C_0805_2012Metric | C1, C2, C3, C4, C7, C8 |
| 1 | 865080342006 47uF 16V Wurth | CP_Elec_5x5.3 | C5 |
| 1 | 0.33uF | C_0805_2012Metric | C6 |
| 11 | 0 | R_0603_1608Metric | R1, R2, R3, R8, R9, R10, R11, R12 +3 |
| 2 | 1M | R_0805_2012Metric | R4, R5 |
| 2 | 1K | R_0603_1608Metric | R6, R7 |
NR1B-ST56 design files
The KiCad project lives in the Flanagan-Lab-Neutron-Detector/NR1B-ST56 repository on GitHub; these links point at the commit this page was built from.
- Layoutv1.0/NR1B-ST56.kicad_pcb
- Schematicv1.0/NR1B-ST56.kicad_sch
NR1B-ST56: common questions
How big is the NR1B-ST56 PCB?
The NR1B-ST56 measures 70.5 × 134 mm, has 4 copper layers and is 1.7702 mm thick.
How many components are on the NR1B-ST56?
40 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the NR1B-ST56 design files?
From the Flanagan-Lab-Neutron-Detector/NR1B-ST56 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NR1B-ST56 design in my own project?
The repository has no license, so all rights stay with Flanagan-Lab-Neutron-Detector. Use it as a reference, and ask the author before reusing the design.