Left side
fornellas·3dpkbd3·left_side/left_side.kicad_pcb
About the Left side PCB
Left side is an open source STM32 PCB design by fornellas, published on GitHub. It is a 2-layer board measuring 172.8 × 138.4 mm, with 92 components from 7 distinct parts.
Its main chip is the STM32F411CEU6_Core_Board, from the STM32 family. Other key parts include the ST77891.5. By type, the board carries 44 switches, 43 diodes, 2 ICs, 2 resistors and 1 connector.
Main components on the Left side
Left side bill of materials (BOM)
92 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F411CEU6_Core_Board | STM32F411CEU6_Core_Board | U1 |
| 1 | ST77891.5 | PinHeader_1x08_P2.54mm_Vertical | U2 |
| 1 | Conn_Right_Side | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 43 | SW_Push | SW_Cherry_MX_Plate_Kailh_PCB_Socket | SW0x0, SW0x1, SW0x2, SW0x3, SW0x4, SW0x5, SW0x6, SW1x0 +35 |
| 1 | SW_NRST | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 43 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D0x0, D0x1, D0x2, D0x3, D0x4, D0x5, D0x6, D1x0 +35 |
| 2 | 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Left side design files
The KiCad project lives in the fornellas/3dpkbd3 repository on GitHub; these links point at the commit this page was built from.
Left side: common questions
What microcontroller does the Left side use?
The Left side is built around the STM32F411CEU6_Core_Board, from the STM32 family.
How big is the Left side PCB?
The Left side measures 172.8 × 138.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Left side?
92 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Left side design files?
From the fornellas/3dpkbd3 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Left side design in my own project?
The repository has no license, so all rights stay with fornellas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Left side without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in 3dpkbd3
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k