Stm32

frankemcgarvey·seniorDesign·PCB/stm32_pcb/stm32_pcb.kicad_pcb

Stm32 PCB layout, top view — open source STM32 board by frankemcgarvey

About the Stm32 PCB

Stm32 is an open source STM32 PCB design by frankemcgarvey, published on GitHub. It is a board measuring 61.6 × 103.1 mm, with 46 components from 21 distinct parts.

Its main chip is the STM32H755ZIT6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 28 capacitors, 8 connectors, 3 inductors, 3 resistors, 2 ICs and 1 crystal.

Main components on the Stm32

Stm32 bill of materials (BOM)

46 components, 21 distinct parts.

QtyPartRefs
1
STM32H755ZIT6
U1
1
AMS1117-3.3
U2
1
Crystal_GND24_Small
Y1
5
Conn_01x04_Male
J1, J2, J5, J6, J7
1
Conn_01x02_Male
J3
1
Screw_Terminal_01x02
J4
1
Conn_01x03_Male
J8
1
K12SCS1.55NOLFTX
SW2
2
Ferrite_Bead_Small
FB1, FB2
1
2.2uH
L1
16
100nF
C1, C4, C5, C6, C7, C9, C10, C11 +8
2
24pF
C2, C3
1
1uF
C8
3
4.7uF
C19, C20, C28
2
10uF
C21, C22
2
2.2uF
C23, C26
1
10uF
C24
1
220pF
C27
1
0
R1
1
10k
R2
Show 1 more
QtyPartRefs
1
47
R3

Stm32 design files

The KiCad project lives in the frankemcgarvey/seniorDesign repository on GitHub; these links point at the commit this page was built from.

Stm32: common questions

What microcontroller does the Stm32 use?

The Stm32 is built around the STM32H755ZIT6, from the STM32 family.

How big is the Stm32 PCB?

The Stm32 measures 61.6 × 103.1 mm and is 1.6 mm thick.

How many components are on the Stm32?

46 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32 design files?

From the frankemcgarvey/seniorDesign repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Stm32 design in my own project?

The repository has no license, so all rights stay with frankemcgarvey. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in seniorDesign

Similar boards