Badge-Aprenda-Soldar
About the Badge-Aprenda-Soldar PCB
Badge-Aprenda-Soldar is an open source PCB design by Franzininho, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 40 × 40 mm, with 12 components from 7 distinct parts.
By type, the board carries 4 resistors, 2 transistors, 2 diodes, 2 capacitors, 1 battery holder and 1 switch.
It belongs with the wearables designs in this gallery.
From the project
Badge - Aprenda Soldar
O badge Aprenda Soldar foi desenvolvido para oficinas de solda onde os participantes dão os primeiros passos com o uso de ferramentas e no conhecimento dos componentes eletrônicos e circuito da placa. Com poucos componentes, esse badge permite que qualquer pessoa aprenda a soldar e se divertir.
O circuito escolhido para esse badge, foi o clássico multivibrador astável com trasistores.
Badge-Aprenda-Soldar bill of materials (BOM)
12 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BC548 | TO-92_Inline_Wide | Q1, Q2 |
| 1 | Battery_Cell | CR2032_HOLDER | BT1 |
| 1 | SW_SPDT | SW_HH_SS12D07-G4-2 | SW1 |
| 2 | LED | LED_D3.0mm | D1, D2 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4 |
| 2 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
Badge-Aprenda-Soldar design files
The KiCad project lives in the Franzininho/badge-Aprenda-Soldar repository on GitHub; these links point at the commit this page was built from.
Badge-Aprenda-Soldar: common questions
How big is the Badge-Aprenda-Soldar PCB?
The Badge-Aprenda-Soldar measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Badge-Aprenda-Soldar?
12 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Badge-Aprenda-Soldar design files?
From the Franzininho/badge-Aprenda-Soldar repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Badge-Aprenda-Soldar design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Franzininho chose for the repository.
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k