9-bay nas backplane
About the 9-bay nas backplane PCB
9-bay nas backplane is an open source PCB design by FreudianNonce, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 115 × 58 mm, with 39 components from 6 distinct parts.
By type, the board carries 19 connectors, 11 capacitors and 9 resistors.
From the project
A DIY 9-Bay NAS Backplane for an ITX NAS
This backplane is designed for connectivity for up to 8 SATA 3.0 storage drives connected to a PCIE HBA, as well as one slot for a SATA 3.0 boot drive connected to a motherboard SATA header. This board was specifically designed to be used in a Fractal Terra with an HDPLEX 250w GaN PSU, but should work for any small form factor NAS.
Dimensions: 115mmx58mm Power Connector: 4-pin peripheral Supply Voltage: 5v Hot Swap: Hardware Supported (HBA must also support)
9-bay nas backplane bill of materials (BOM)
39 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HDD POWER | TE_MATE-N-LOK_350211-1_1x04_P5.08mm_Vertical | J1 |
| 9 | 87779-1001 | 877791001 | J101, J201, J301, J401, J501, J601, J701, J801 +1 |
| 9 | 67800-8025 | 678008025 | J102, J202, J302, J402, J502, J602, J702, J802 +1 |
| 2 | 25v 560uf | CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 9 | 35v 10uf | C_1206_3216Metric | C101, C201, C301, C401, C501, C601, C701, C801 +1 |
| 9 | 22ohm | R_1206_3216Metric | R101, R201, R301, R401, R501, R601, R701, R801 +1 |
9-bay nas backplane design files
The KiCad project lives in the FreudianNonce/9-bay-nas-backplane repository on GitHub; these links point at the commit this page was built from.
- Layout9bay_sata_backplane.kicad_pcb
- Schematic9bay_sata_backplane.kicad_sch
9-bay nas backplane: common questions
How big is the 9-bay nas backplane PCB?
The 9-bay nas backplane measures 115 × 58 mm, has 2 copper layers and is 1.600198 mm thick.
How many components are on the 9-bay nas backplane?
39 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the 9-bay nas backplane design files?
From the FreudianNonce/9-bay-nas-backplane repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 9-bay nas backplane design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which FreudianNonce chose for the repository.