GPS-PND
FTHGL·GPS-PND·GPS_PND/GPS-PND/GPS-PND.kicad_pcb
About the GPS-PND PCB
GPS-PND is an open source STM32 PCB design by FTHGL, published on GitHub under the MIT license. It is a 2-layer board measuring 44.3 × 26.4 mm, with 26 components from 19 distinct parts.
Its main chip is the STM32F301K6Ux, from the STM32 family. Other key parts include the AZ1117-3.3. By type, the board carries 12 capacitors, 3 ICs, 3 inductors, 2 connectors, 2 switches and 2 resistors.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
GPS Personal Navigation Device, STM32F301K6Ux, MS38SN3 gnss module, AZ1117-3.3
This repository contains the KiCad design files and documentation for the GPS PND (Portable Navigation Device) project. The design includes a power supply circuit, STM32F301K6 microcontroller, and the MS38SN4 GNSS module, aimed at providing GPS functionality for various IoT and navigation applications.

Main components on the GPS-PND
GPS-PND bill of materials (BOM)
26 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F301K6Ux | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | ~ | MS38SN4 | U3 |
| 1 | 8Mhz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | ED555/2DS | ED555_2DS | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 2 | ~ | SW_SPST_B3U-1000P-B | SW1, SW2 |
| 1 | ~ | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 2 | BLM15HD102SN1 | L_0201_0603Metric_Pad0.64x0.40mm_HandSolder | FB1, FB2 |
| 1 | 27 nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 4 | 100 nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4 |
| 1 | 4.7 uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 1 uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 10 nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7 |
| 1 | 5 pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8 |
| 2 | 25 pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10 |
| 1 | 10 uF | CP_EIA-3216-12_Kemet-S_Pad1.58x1.35mm_HandSolder | C11 |
| 1 | 22 uF | CP_EIA-3216-12_Kemet-S_Pad1.58x1.35mm_HandSolder | C12 |
| 2 | 4.7k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
GPS-PND design files
The KiCad project lives in the FTHGL/GPS-PND repository on GitHub; these links point at the commit this page was built from.
GPS-PND: common questions
What microcontroller does the GPS-PND use?
The GPS-PND is built around the STM32F301K6Ux, from the STM32 family.
How big is the GPS-PND PCB?
The GPS-PND measures 44.3 × 26.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GPS-PND?
26 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the GPS-PND design files?
From the FTHGL/GPS-PND repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GPS-PND design in my own project?
Yes, under the terms of its MIT license, which FTHGL chose for the repository.
Can I test firmware for the GPS-PND without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k