AIPE Smoke
About the AIPE Smoke PCB
AIPE Smoke is an open source PCB design by FulongLi, published on GitHub. It is a 2-layer board measuring 25 × 18 mm, with 3 components from 3 distinct parts.
By type, the board carries 2 resistors and 1 connector.
From the project
This is a passive 10k/10k divider with a three-pin connector. It is not the 1 kW converter. Sources, reports and outputs demonstrate the CAD pipeline only.
This is a passive 10k/10k divider with a three-pin connector. It is not the 1 kW converter. Sources, reports and outputs demonstrate the CAD pipeline only.
The 25 x 18 mm, two-layer board has three components, three nets, routed top and bottom tracks, a through via and a filled bottom ground zone. All symbol pins are connected. Official KiCad symbols and footprints are retained locally as small library subsets. KiCad's installed 3D library supplies the component models.
AIPE Smoke bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74651195 VIN_VOUT_GND Wurth Elektronik | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | RC0805FR-074R7L 10k Yageo | R_0805_2012Metric | R1 |
| 1 | RC0805FR-0710KL 10k Yageo | R_0805_2012Metric | R2 |
AIPE Smoke design files
The KiCad project lives in the FulongLi/AIPE-PCB-Agent repository on GitHub; these links point at the commit this page was built from.
AIPE Smoke: common questions
How big is the AIPE Smoke PCB?
The AIPE Smoke measures 25 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AIPE Smoke?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AIPE Smoke design files?
From the FulongLi/AIPE-PCB-Agent repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AIPE Smoke design in my own project?
The repository has no license, so all rights stay with FulongLi. Use it as a reference, and ask the author before reusing the design.
