HardLabs

RC-PLANE-V2

Gabouin·RC-PLANE-V2·schematic/RC plane.kicad_sch

RC-PLANE-V2
Simulate this board

About the RC-PLANE-V2 PCB

RC-PLANE-V2 is an open source PCB design by Gabouin, published on GitHub under the Unlicense license. It is a board, with 7 components from 5 distinct parts.

Other key parts include the ESC 30A, RX 2.4ghz and BLDC 1000KV. By type, the board carries 3 ICs and 3 modules.

It belongs with the robotics & motion, wearables and power & battery designs in this gallery.

From the project

The second version of my RC plane but 3D printed

APX RC PLANE is a simple and cost effective RC PLANE that has 3 axis and is 3D printed with lightweight filament.

- 30 A ESC to manage the electric flow - 3S 1000MaH battery for a long performance - 2200KV Brushless Motor - 6 channels for future module additions - Light weight of 720g thanks to foaming PLA - Long airframe of 120cm

- schematic/ - wiring diagram of the electronics - CAD/ - full 3d model - images/ - images used in the README and documentation

Main components on the RC-PLANE-V2

ESC 30ARX 2.4ghzBLDC 1000KV

RC-PLANE-V2 bill of materials (BOM)

7 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESC 30A
U1
1
RX 2.4ghz
U2
1
BLDC 1000KV
U3
3
Motor_Servo_AirTronics
M1, M2, M3
1
Battery
3CELL1

RC-PLANE-V2 design files

The KiCad project lives in the Gabouin/RC-PLANE-V2 repository on GitHub; these links point at the commit this page was built from.

RC-PLANE-V2: common questions

How many components are on the RC-PLANE-V2?

7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RC-PLANE-V2 design files?

From the Gabouin/RC-PLANE-V2 repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the RC-PLANE-V2 design in my own project?

Yes, under the terms of its Unlicense license, which Gabouin chose for the repository.

Similar boards