Openplant incubator
About the Openplant incubator PCB
Openplant incubator is an open source PCB design by genspace, published on GitHub. It is a 2-layer board measuring 96.5 × 61 mm, with 30 components from 21 distinct parts.
By type, the board carries 12 connectors, 11 resistors and 7 transistors.
Openplant incubator bill of materials (BOM)
30 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DMG6402LVT-7 OUT_FAN_1 | SOT-23-6 | Q1 |
| 1 | DMG6402LVT-7 OUT_FAN_2 | SOT-23-6 | Q2 |
| 1 | DMG6402LVT-7 LIGHTS | SOT-23-6 | Q3 |
| 1 | DMG6402LVT-7 PELTIER_1 | SOT-23-6 | Q4 |
| 1 | DMG6402LVT-7 PELTIER_2 | SOT-23-6 | Q5 |
| 2 | DMG6402LVT-7 | SOT-23-6 | Q6, Q7 |
| 1 | PPTC121LFBN-RC Conn_01x12_Socket | PinSocket_1x12_P2.54mm_Vertical | J1 |
| 1 | PPTC161LFBN-RC Conn_01x16_Socket | PinSocket_1x16_P2.54mm_Vertical | J2 |
| 1 | 61300411121 OUT_FAN_1 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | 61300411121 OUT_FAN_2 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | 61300411121 IN_FAN_1 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 61300411121 IN_FAN_2 | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | 61300211121 PELTIER_1 | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | 61300211121 PELTIER_2 | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | 61300411121 LIGHTS | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J11 |
| 1 | 61300211121 Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | ATX-24 | Molex_Mini-Fit_Jr_5569-24A2_2x12_P4.20mm_Horizontal | J13 |
| 2 | CRCW12101K00JNEAIF 1K | R_1210_3225Metric | R1, R2 |
| 3 | RMCF0603JT10K0 10K | R_0603_1608Metric | R3, R4, R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | RMCF0603ZT0R00 0R | R_0603_1608Metric | R6, R7, R8, R9, R10, R11 |
Openplant incubator design files
The KiCad project lives in the genspace/openplant-incubator repository on GitHub; these links point at the commit this page was built from.
Openplant incubator: common questions
How big is the Openplant incubator PCB?
The Openplant incubator measures 96.5 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Openplant incubator?
30 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Openplant incubator design files?
From the genspace/openplant-incubator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Openplant incubator design in my own project?
The repository has no license, so all rights stay with genspace. Use it as a reference, and ask the author before reusing the design.