Lute relay hw

golioth·lute-relay-hw

Lute relay hw PCB layout, top view — open source board by golioth

About the Lute relay hw PCB

Lute relay hw is an open source PCB design by golioth, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 80.7 × 78.7 mm, with 45 components from 18 distinct parts.

Other key parts include the PCAL6408APWJ and DRDC3105F-7. By type, the board carries 13 resistors, 10 diodes, 8 connectors, 5 ICs, 5 capacitors and 4 relays.

From the project

The Aludel Lute Relay is a 4-channel high-power relay add-on board that plugs into the Aludel Elixir: four J107F1CS203VDC80 relays (rated below at up to 20A / 240V) are driven from the Elixir's 3.3V logic via DRDC3105F-7 drivers, with PCAL6408APWJ I2C I/O expanders, terminal bloc

The Aludel Lute Relay is a 4-channel high-power relay add-on board that plugs into the Aludel Elixir: four J107F1CS203VDC80 relays (rated below at up to 20A / 240V) are driven from the Elixir's 3.3V logic via DRDC3105F-7 drivers, with PCAL6408APWJ I2C I/O expanders, terminal blocks, and status LEDs. The design is KiCad 8.0, schematic title block "Lute" rev A (2024-09-12), company "Golioth". There are 8 commits; last activity was 2024-11-25, and the 2024-10-03 commit message states the board was "ready for fab". Whether boards were ever fabricated or tested is [UNKNOWN] — no fabrication…

Main components on the Lute relay hw

PCAL6408APWJDRDC3105F-7

Lute relay hw bill of materials (BOM)

45 components, 18 distinct parts.

QtyPartRefs
1
PCAL6408APWJ
U1
4
DRDC3105F-7
U2, U3, U4, U5
4
Conn_01x08
J1, J2, J7, J8
4
Screw_Terminal_01x03
J3, J4, J5, J6
4
J107F1CS203VDC80
K1, K2, K3, K4
1
Red
D1
1
Green
D2
1
Yellow
D3
4
1N4148
D4, D5, D6, D7
1
LED
D8
2
XZMDKCBDDG45S-9
D9, D10
1
0.1U
C1
4
10U
C2, C3, C4, C5
3
0
R1, R2, R3
1
2K2
R4
1
1K8
R5
2
500
R6, R7
6
1K
R8, R9, R22, R23, R24, R25

Lute relay hw design files

The KiCad project lives in the golioth/lute-relay-hw repository on GitHub; these links point at the commit this page was built from.

Lute relay hw: common questions

How big is the Lute relay hw PCB?

The Lute relay hw measures 80.7 × 78.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lute relay hw?

45 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lute relay hw design files?

From the golioth/lute-relay-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Lute relay hw design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which golioth chose for the repository.