HardLabs

CIT-Kokrajhar-ECE-PCB-badge

H1mJT·CIT-Kokrajhar-ECE-PCB-badge

CIT-Kokrajhar-ECE-PCB-badge layout, top view — open source board by H1mJT

About the CIT-Kokrajhar-ECE-PCB-badge

CIT-Kokrajhar-ECE-PCB-badge is an open source PCB design by H1mJT, published on GitHub under the MIT license. It is a 2-layer board measuring 49.8 × 67.5 mm, with 17 components from 4 distinct parts.

By type, the board carries 13 diodes, 2 crystals and 2 connectors.

It belongs with the wearables designs in this gallery.

From the project

A simple pcb badge made with KiCAD 6.0.0

* Goto JLCPCB and upload the Gerber Zip file.

* Remove order number: Yes (Or there'll be a random number either on front or back ruining the badge aesthetics)

Use any website to order the components like Hnhcart, ktron etc ## Assembly

* Soldiering the battery holder and switch is fairly simple.

Now let's come to LED's. Soldier the LED's upside down**. The glowing side should be facing down since it'll shine throgh the transparent ECE text. Keep in mind the polarity of LED and follow the polarity as shown in silkscreen.

CIT-Kokrajhar-ECE-PCB-badge, from the project README
From the project README

CIT-Kokrajhar-ECE-PCB-badge bill of materials (BOM)

17 components, 4 distinct parts.

QtyPartRefs
2
Badgelife_shitty_connector
X1, X2
1
Conn_01x02
J1
1
Conn_01x02
J2
13
LED
D1, D2, D3, D4, D5, D6, D7, D8 +5

CIT-Kokrajhar-ECE-PCB-badge design files

The KiCad project lives in the H1mJT/CIT-Kokrajhar-ECE-PCB-badge repository on GitHub; these links point at the commit this page was built from.

CIT-Kokrajhar-ECE-PCB-badge: common questions

How big is the CIT-Kokrajhar-ECE-PCB-badge?

The CIT-Kokrajhar-ECE-PCB-badge measures 49.8 × 67.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CIT-Kokrajhar-ECE-PCB-badge?

17 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the CIT-Kokrajhar-ECE-PCB-badge design files?

From the H1mJT/CIT-Kokrajhar-ECE-PCB-badge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CIT-Kokrajhar-ECE-PCB-badge design in my own project?

Yes, under the terms of its MIT license, which H1mJT chose for the repository.

Similar boards