DC801 SAINTCON Minibadge
About the DC801 SAINTCON Minibadge PCB
DC801 SAINTCON Minibadge is an open source PCB design by hamster, published on GitHub under the MIT license. It is a 2-layer board measuring 20.3 × 20.3 mm, with 4 components from 4 distinct parts.
Other key parts include the SAINTCON-Minibadge. By type, the board carries 2 diodes, 1 IC and 1 resistor.
It belongs with the wearables designs in this gallery.
From the project
Minibadge design for the 2017 SAINTCON badge with a DC801 theme
The Minibadge includes a spiffy DC801 design and two automatic slow-cycling RGB LEDs
1. SAINTCON Minibadge Mode 2. Shirt Pin Mode
1) Insert the LEDs into the back of the board with the shorter legs toward the top 2) Bend the legs of the LEDs over to contact the pads 3) Trim legs to pads and solder 4) Pick a resistor and solder R1: 0 - Brightest, 20-55mA 470 - Bright, 3-4mA 1k - Not so bright, 1.5-2mA 5) Break the pin headers to fit 6) Cut the sockets into two 8 pin sockets 7) Insert the sockets with pins into your SAINTCON badge 8) Place the DC801 Minibadge onto the pins and solder 9) Flip…
Main components on the DC801 SAINTCON Minibadge
DC801 SAINTCON Minibadge bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAINTCON-Minibadge | SAINTCON-Minibadge-NoSPI-NoSilk | U1 |
| 1 | LED | LED-3.0mm-ThroughBoard | D1 |
| 1 | LED | LED-3.0mm-ThroughBoard-Flip | D2 |
| 1 | 470 | R_1206_HandSoldering | R1 |
DC801 SAINTCON Minibadge design files
The KiCad project lives in the hamster/DC801-SAINTCON2017-Minibadge repository on GitHub; these links point at the commit this page was built from.
DC801 SAINTCON Minibadge: common questions
How big is the DC801 SAINTCON Minibadge PCB?
The DC801 SAINTCON Minibadge measures 20.3 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DC801 SAINTCON Minibadge?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the DC801 SAINTCON Minibadge design files?
From the hamster/DC801-SAINTCON2017-Minibadge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DC801 SAINTCON Minibadge design in my own project?
Yes, under the terms of its MIT license, which hamster chose for the repository.
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k