Project 1 LED Torch
About the Project 1 LED Torch PCB
Project 1 LED Torch is an open source PCB design by harris8099, published on GitHub. It is a 2-layer board measuring 63.5 × 26.6 mm, with 4 components from 4 distinct parts.
By type, the board carries 1 switch, 1 diode and 1 resistor.
Project 1 LED Torch bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Battery_Cell | BatteryHolder_Keystone_1058_1x2032 | Bet 2032 |
| 1 | SW_DPDT_x2 | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 5.1K R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Project 1 LED Torch design files
The KiCad project lives in the harris8099/Kicad-projects repository on GitHub; these links point at the commit this page was built from.
Project 1 LED Torch: common questions
How big is the Project 1 LED Torch PCB?
The Project 1 LED Torch measures 63.5 × 26.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Project 1 LED Torch?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Project 1 LED Torch design files?
From the harris8099/Kicad-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Project 1 LED Torch design in my own project?
The repository has no license, so all rights stay with harris8099. Use it as a reference, and ask the author before reusing the design.
More boards in Kicad-projects
ESP32ESP32 based dev board
84.5 × 54.8 mm85 parts4LNo license0
ESP32Mni drone
102.4 × 102.4 mm72 parts2LNo license0
Modem carrier
57.5 × 62.4 mm56 parts2LNo license0
Breadboard power supply
30.5 × 52.8 mm17 parts2LNo license0
Tiny Solar Supply
40.2 × 18.6 mm16 parts2LNo license0
DC-DC Buck convertor
33.5 × 16.4 mm16 parts2LNo license0