PCB 2 Segments boards
HexCatDev·Rocnikovy_projekt·PCB_2_Segments_boards/PCB_2_Segments_boards.kicad_pcb
About the PCB 2 Segments boards
PCB 2 Segments boards is an open source PCB design by HexCatDev, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 66.7 × 0.3 mm, with 4 components from 4 distinct parts.
From the project
Po konzultaci s panem Máchou by bylo lepší Multiplexovat číslice 1:6 tzn. že v jednom okamžiku problikne jeden segment, takto se "probliká" každý segment zvlášť v určité rychlosti(Hz), od určité rychlosti ± 30 Hz se obraz jeví jako spojitý.[1] ### Blokové schéma
Po konzultaci s panem Máchou by bylo lepší Multiplexovat číslice 1:6 tzn. že v jednom okamžiku problikne jeden segment, takto se "probliká" každý segment zvlášť v určité rychlosti(Hz), od určité rychlosti ± 30 Hz se obraz jeví jako spojitý.[1] ### Blokové schéma
- Obecné informace na vstupu napětí jsou umístěny tzv. Tank Capacitors[2, kap. 4.2.2], jsou to dva kondenzátory 100uF/35V na napájení jejich funkce zajišťuje stabilní napětí při náhlém zvětšení proudového zatížení. Každý IO napájený z VCC má připojený tzv. Decoupling Capacitors[10] tyto kondenzátory mají na starosti odrušení od…

PCB 2 Segments boards bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | DIP 18 Patice Display Digit 1 | S1 |
| 1 | S | Patice_display | S2 |
| 1 | ~ | DIP 18 Patice Display Digit 2 | S3 |
| 1 | ~ | DIP-10 Patice Display Digit 3 4 | S4 |
PCB 2 Segments boards design files
The KiCad project lives in the HexCatDev/Rocnikovy_projekt repository on GitHub; these links point at the commit this page was built from.
PCB 2 Segments boards: common questions
How big is the PCB 2 Segments boards?
The PCB 2 Segments boards measures 66.7 × 0.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB 2 Segments boards?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB 2 Segments boards design files?
From the HexCatDev/Rocnikovy_projekt repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB 2 Segments boards design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.