We755a slc

hharte·we755a_slc·hardware/we755a_slc.kicad_pcb

We755a slc PCB layout, top view — open source board by hharte

About the We755a slc PCB

We755a slc is an open source PCB design by hharte, published on GitHub under the MIT license. It is a 2-layer board measuring 88.9 × 79.8 mm, with 45 components from 26 distinct parts.

Other key parts include the AVR128DA28-E/SP, LTV-844, SN65HVD3082EP and LAA108. By type, the board carries 15 resistors, 9 ICs, 8 capacitors, 5 connectors, 5 diodes and 2 fuses.

From the project

WE 755A PBX Station Line Concentrator

The Western Electric 755A PBX station set with line lamps requires 15 wires between the station set and the PBX. This project is a concentrator that cuts down the requirement to 4 pairs (8 wires) so a standard 4-pair CAT6 cable can be used per station.

Here is an introductory video of the 755A PBX in operation.

The board contains a microcontroller, six solid-state relays, and six opto-isolated inputs. Boards are assembled in either the PBX-End Concentrator or the STA-End Concentrator configuration. The PBX-End Concentrator connects to the 755A PBX station line, and the STA-End Concentrator…

We755a slc, from the project README
From the project README

Main components on the We755a slc

We755a slc bill of materials (BOM)

45 components, 26 distinct parts.

QtyPartRefs
1
AVR128DA28-E/SP
AVR128DA28-I/SS
U1
2
LTV-844
U2, U5
3
SN65HVD3082EP
THVD1420D
U3, U8, U9
3
LAA108
U4, U6, U7
2
OSTYK42108030
Screw_Terminal_01x08
J1, J2
1
61300611021
Conn_01x06_Male
J3
1
54602-908LF
CONC_CABLE
J4
1
0705430003
Conn_01x04
J5
2
RXEF025
Polyfuse
F1, F2
1
DPBW06F-05
PS1
2
1N4007-E3/73
1N4007
D1, D2
1
WP934CB/GD
GREEN LED
D3
2
WP934CB/ID
RED LED
D4, D5
4
K104M15X7RF5TL2
0.1uF
C1, C5, C6, C7
1
FG14X7R1A106KRT06
10uf / 10V
C2
1
RDER72J104K4K1H03B
0.1uF/630V
C3
1
K103K15X7RF5UL2
0.01uF
C4
1
FK14X5R1A475KN020
4.7uF
C8
5
CFM12JT10K0
10K
R1, R5, R6, R8, R10
2
CFM12JT22K0
22K
R2, R3
Show 6 more
QtyPartRefs
3
CFM12JT120R
120
R4, R11, R12
1
CFM12JT1M00
1M
R7
1
CFM12JT100K0
100K
R9
1
CFM12JT220R
220
R13
1
4610X-1-221LF
220
RN1
1
4610X-1-221LF
220 (STA) or 1.5K (PBX)
RN2

We755a slc design files

The KiCad project lives in the hharte/we755a_slc repository on GitHub; these links point at the commit this page was built from.

We755a slc: common questions

How big is the We755a slc PCB?

The We755a slc measures 88.9 × 79.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the We755a slc?

45 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the We755a slc design files?

From the hharte/we755a_slc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the We755a slc design in my own project?

Yes, under the terms of its MIT license, which hharte chose for the repository.