Sw
About the Sw PCB
Sw is an open source STM32 PCB design by Himanshukohale22, published on GitHub. It is a 2-layer board measuring 27.5 × 38.9 mm, with 28 components from 16 distinct parts.
Its main chip is the STM32F411CCUx, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 10 capacitors, 8 connectors, 3 resistors, 2 ICs, 2 switches and 2 diodes.
It belongs with the power & battery and sensors designs in this gallery.
From the project
This is TCV rocketry flight computer
This repository contains hardware files,specifcation of board,firmware/software of Thrust vector control model Rocketry. this project is open source can be used as and update as required.
SPECIFICATION OF TVC FLIGHT COMPUTER: --- small flight computer board 8.25 cm . stm32f4xc on board micro-controller ARM ®32-bit Cortex M4 CPU with FPU Adaptive real-time accelerator allowing 0-wait state execution Up to 512 Kbytes of Flash memory 128 Kbytes of SRAM * operating frequency of 100MHz.

Main components on the Sw
Sw bill of materials (BOM)
28 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F411CCUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | Crystal_GND23_Small | Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y1 |
| 6 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J1, J2, J4, J5, J6, J7 |
| 1 | USB_OTG | USB_Micro-B_Molex_47346-0001 | J11 |
| 1 | Conn_ARM_JTAG_SWD_10 | Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J34 |
| 1 | SW_Push_Dual_x2 | Panasonic_EVQPUJ_EVQPUA | SW1 |
| 1 | SW_DPDT_x2 | SW_CuK_JS202011CQN_DPDT_Straight | SW2 |
| 1 | green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | 10uf | CP_Elec_4x3.9 | C1 |
| 2 | 0.1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 12pf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6 |
| 5 | 100nf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C7, C8, C9, C10 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Sw design files
The KiCad project lives in the Himanshukohale22/Sw repository on GitHub; these links point at the commit this page was built from.
- Layoutstmdevlopment_board.kicad_pcb
- Schematicstmdevlopment_board.kicad_sch
Sw: common questions
What microcontroller does the Sw use?
The Sw is built around the STM32F411CCUx, from the STM32 family.
How big is the Sw PCB?
The Sw measures 27.5 × 38.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sw?
28 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sw design files?
From the Himanshukohale22/Sw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sw design in my own project?
The repository has no license, so all rights stay with Himanshukohale22. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k