NinjaLAMP
About the NinjaLAMP PCB
NinjaLAMP is an open source PCB design by hisashin, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 84.5 × 30 mm, with 32 components from 21 distinct parts.
Other key parts include the 102010328 and 310030100. By type, the board carries 14 resistors, 3 capacitors, 2 ICs, 2 transistors, 2 connectors and 1 diode.
From the project
for LAMP
Main components on the NinjaLAMP
NinjaLAMP bill of materials (BOM)
32 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 102010328 SeeeduinoXIAO | SeeeduinoXIAO-MOUDLE14P-2.54-21X17.8MM | U1 |
| 1 | 310030100 PMIC-CJ78M05_TO-252_ | TO-252 | U2 |
| 1 | 305030015 BSP89 | SOT95P240X112-3N | Q1 |
| 1 | BSP89 | SOT95P240X112-3N | Q2 |
| 1 | 320120003 Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 1 | Conn_01x05_Male | Pin_Header_Straight_1x05_Pitch1.27mm | J2 |
| 1 | M24C02-RMN6TP | M24C02-RMN6TP | CR1 |
| 1 | BSP89 | TO-220-3_Vertical | EXTRA_Q1 |
| 1 | Fan_3pin | Molex_KK-6410-03_03x2.54mm_Straight | FAN1 |
| 4 | Conn_01x02_Female | Pin_Header_Straight_1x02_Pitch2.54mm | HEATER1, HEATER2, NTC_AIR1, NTC_WELL1 |
| 1 | NTCG164KF104FT1S Thermistor | R_0603_HandSoldering | TH1 |
| 1 | I2C_SSD1306_LCD | I2C_SSD1306_LCD | D2 |
| 1 | 302030098 CP | ELECTRO-SMD-C-12.5x13.5MM | C1 |
| 1 | CC0603KRX7R7BB334 0.33uF | C_0603_HandSoldering | C2 |
| 1 | CL10B104KA8NNNC 0.1uF | C_0603_HandSoldering | C3 |
| 2 | 15 | R_0603_HandSoldering | R1, R3 |
| 1 | 75 | R_0603_HandSoldering | R2 |
| 8 | 47K | R_0603_HandSoldering | R4, R5, R6, R7, R8, R9, R10, R14 |
| 1 | BLM18AG102SN1D 1K | R_0603_HandSoldering | R11 |
| 1 | RC0603FR-0747KL 47K | R_0603_HandSoldering | R12 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1K | R_0603_HandSoldering | R13 |
NinjaLAMP design files
The KiCad project lives in the hisashin/qNinjaLite repository on GitHub; these links point at the commit this page was built from.
NinjaLAMP: common questions
How big is the NinjaLAMP PCB?
The NinjaLAMP measures 84.5 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NinjaLAMP?
32 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NinjaLAMP design files?
From the hisashin/qNinjaLite repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the NinjaLAMP design in my own project?
Yes, under the terms of its GPL-3.0 license, which hisashin chose for the repository.
