Prepared
HoodPaul·72pin-fpm-simm-1mx4·routing/prepared.kicad_pcb
About the Prepared PCB
Prepared is an open source PCB design by HoodPaul, published on GitHub. It is a 4-layer board measuring 108 × 25.4 mm, with 43 components from 7 distinct parts.
Other key parts include the 1Mx4 FPM / 70 ns. By type, the board carries 16 ICs, 16 capacitors, 4 resistors and 1 connector.
From the project
72-pin FPM SIMM: 4 MB single-sided or 8 MB double-sided, using NEC or Hyundai 1M × 4-bit SOJ DRAM
A four-layer, 72-pin, 32-bit non-parity FPM SIMM for replacing damaged modules and reusing working 1M × 4 DRAMs recovered from them. Populate eight chips on the front for 4 MB, or eight on each face for 8 MB. This is a separate design from the four-chip HY5118160-based A7 module.
The connector geometry and 107.95 × 25.4 mm outline come from the established Amiga 72-pin FPM SIMM project, reviewed at commit b6bf8ff9898979521396618cf54d43f41eb394d4. The copper is newly designed for the twenty-lead donor packages. The finished thickness remains nominally 1.2 mm.

Main components on the Prepared
Prepared bill of materials (BOM)
43 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | 1Mx4 FPM / 70 ns | SOJ20_26_300mil | U1, U2, U3, U4, U5, U6, U7, U8 +8 |
| 1 | 72-pin SIMM / same nets on both faces | SIMM72 | J1 |
| 2 | 4.7uF / 16V X7R | C_0805 | CB1, CB2 |
| 4 | 0R / POPULATION OPTION | R_0603 | PD1, PD2, PD3, PD4 |
| 16 | 220nF / 16V X7R | C_0805 | C1, C2, C3, C4, C5, C6, C7, C8 +8 |
| 2 | 0R / REAR ENABLE | R_0603 | R1, R2 |
| 2 | 10k / RAS PULL-UP | R_0603 | R3, R4 |
Prepared design files
The KiCad project lives in the HoodPaul/72pin-fpm-simm-1mx4 repository on GitHub; these links point at the commit this page was built from.
Prepared: common questions
How big is the Prepared PCB?
The Prepared measures 108 × 25.4 mm, has 4 copper layers and is 1.2 mm thick.
How many components are on the Prepared?
43 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Prepared design files?
From the HoodPaul/72pin-fpm-simm-1mx4 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Prepared design in my own project?
The repository has no license, so all rights stay with HoodPaul. Use it as a reference, and ask the author before reusing the design.