Mockingbird-Dual-Line-Card

hwstar·Mockingbird-Dual-Line-Card

Mockingbird-Dual-Line-Card PCB layout, top view — open source STM32 board by hwstar

About the Mockingbird-Dual-Line-Card PCB

Mockingbird-Dual-Line-Card is an open source STM32 PCB design by hwstar, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 100 × 100 mm, with 117 components from 40 distinct parts.

Its main chip is the 800405-101, from the STM32 family. Other key parts include the 800418-101, 800379-101 and 800187-101. By type, the board carries 38 resistors, 36 capacitors, 8 test points, 7 connectors, 6 ICs and 3 LEDs.

From the project

An interface card design for the Mockingbird Telephone Exchange.

An interface card design for the Mockingbird Telephone Exchange.

Features: Provides two subscriber line interfaces. STM32F103C8T6 microcontroller. Accessed from the Main Microcontroller over I2C ATTEN signal to main microcontroller to tell it when there is an event to service. Audio bandpass filter for the received audio. Uses one R-TONE KS0835 SLIC module for each telephone line interface. Analog RX audio output, and TX audio input. Designed n KiCAD 8.0.

Mockingbird-Dual-Line-Card, from the project README
From the project README

Main components on the Mockingbird-Dual-Line-Card

800418-101800379-101800405-101800187-101

Mockingbird-Dual-Line-Card bill of materials (BOM)

117 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
800418-101
KS0835F
R-TONE
U301, U501
2
800379-101
LM358
LCSC
U302, U502
1
800405-101
STM32F103C4Tx
LCSC
U401
1
800187-101
ME6211A33M3G-N
Nanjing Micro One Elec
U402
2
800346-101
2N7002
LCSC
Q302, Q502
1
800412-008
8.0M
LCSC
Y401
1
800425-116
Conn_02x08_Odd_Even
LCSC
J201
1
800425-110
Conn_02x05_Odd_Even
LCSC
J202
2
800417-104
6P6C
Connfly
J301, J501
1
800383-104
CONN4
DEALON
J401
1
800383-106
CONN6
LCSC
J402
1
800425-106
Conn_02x03_Odd_Even
LCSC
J403
8
800350-101
M7
LCSC
CR301, CR302, CR304, CR305, CR501, CR502, CR504, CR505
2
800419-750
SMAJ75
YFW
CR303, CR503
8
TESTPINTPSQ025
TP401, TP402, TP403, TP404, TP405, TP406, TP407, TP408
6
800424-350
P3100SC
LCSC
Z301, Z302, Z303, Z501, Z502, Z503
3
800113-102
LEDGRN-SAR
LCSC
DS301, DS401, DS501
15
800063-104
0.1u
Kyocera AVX
C301, C303, C305, C311, C404, C405, C406, C407 +7
2
800439-108
1000u
LCSC
C302, C502
4
800421-107
100u
LCSC
C304, C312, C504, C512
Show 20 more
QtyPartRefs
2
800423-224
0.22u
Yageo
C306, C506
2
800422-154
0.15u
Yageo
C307, C507
3
800003-106
10u
Murata Electronics
C308, C402, C508
2
800422-333
0.033u
YAGEO
C310, C510
2
800002-103
0.01u
LCSC
C313, C513
1
800238-105
1u
WALSIN TECH CORP
C401
1
800003-226
22u
LCSC
C403
2
800002-220
22p
LCSC
C409, C410
4
800021-470
470
LCSC
R301, R402, R404, R501
8
800057-100
10
LCSC
R302, R304, R305, R314, R502, R504, R505, R514
3
800057-105
1M
Uni-Royal
R303, R403, R503
6
800022-220
2.2K
LCSC
R306, R307, R312, R506, R507, R512
2
800022-150
1.5K
LCSC
R309, R509
2
800022-300
3K
Resistor.Today
R310, R510
2
800021-100
100
LCSC
R311, R511
2
800022-680
6.8K
LCSC
R315, R515
2
800023-470
47K
LCSC
R316, R516
3
800023-100
10K
WALSIN TECH CORP
R401, R408, R409
3
800020-000
0
LCSC
R407, R410, R411
1
800020-330
33
Uni-Royal
R412

Mockingbird-Dual-Line-Card design files

The KiCad project lives in the hwstar/Mockingbird-Dual-Line-Card repository on GitHub; these links point at the commit this page was built from.

Mockingbird-Dual-Line-Card: common questions

What microcontroller does the Mockingbird-Dual-Line-Card use?

The Mockingbird-Dual-Line-Card is built around the 800405-101, from the STM32 family.

How big is the Mockingbird-Dual-Line-Card PCB?

The Mockingbird-Dual-Line-Card measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Mockingbird-Dual-Line-Card?

117 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mockingbird-Dual-Line-Card design files?

From the hwstar/Mockingbird-Dual-Line-Card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mockingbird-Dual-Line-Card design in my own project?

Yes, under the terms of its GPL-3.0 license, which hwstar chose for the repository.

Can I test firmware for the Mockingbird-Dual-Line-Card without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards