Sweep mx plate
About the Sweep mx plate PCB
Sweep mx plate is an open source PCB design by idank, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 107.9 × 95.2 mm, with 25 components from 2 distinct parts.
It belongs with the keyboards designs in this gallery.
From the project
This repo contains pcb and 3d files for keyboards. The keyboards are adaptations of popular open source keyboards with a variety of changes.
This repo contains pcb and 3d files for keyboards. The keyboards are adaptations of popular open source keyboards with a variety of changes.
Check [holykeebs.com][hk] for kits and prebuilt keyboards.
This work is licensed under a [Creative Commons Attribution-ShareAlike 4.0 International License][cc-by-sa].
[cc-by-sa]: http://creativecommons.org/licenses/by-sa/4.0/ [hk]: https://holykeebs.com
Sweep mx plate bill of materials (BOM)
25 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | M2_HOLE_NPH | M2_HOLE_NPH | Mounting 01, Mounting 02, Mounting 03, Mounting 04, Puck1, Puck2, Puck3, Puck4 |
| 17 | SW_Push | SW_Hole | SW2, SW3, SW4, SW5, SW6, SW8, SW9, SW10 +9 |
Sweep mx plate design files
The KiCad project lives in the idank/keyboards repository on GitHub; these links point at the commit this page was built from.
Sweep mx plate: common questions
How big is the Sweep mx plate PCB?
The Sweep mx plate measures 107.9 × 95.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sweep mx plate?
25 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sweep mx plate design files?
From the idank/keyboards repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sweep mx plate design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which idank chose for the repository.
More boards in keyboards
Corne light
4.3 × 4.4 mm164 parts4LCC-BY-SA-4.010
Corne light copy
275.5 × 105.6 mm164 parts4LCC-BY-SA-4.010
Corne choc
130 × 87.7 mm140 parts2LCC-BY-SA-4.010
Keyball61 Left
143 × 113.5 mm125 parts2LCC-BY-SA-4.010
Lily58-choc panel
279.3 × 116.1 mm124 parts2LCC-BY-SA-4.010
Sweeq mx
95.2 × 113.5 mm78 parts2LCC-BY-SA-4.010
Panel
185 × 129.9 mm78 parts2LCC-BY-SA-4.010
Sweeq
107.2 × 86.9 mm74 parts2LCC-BY-SA-4.010
Chococorne
130 × 87.7 mm47 parts2LCC-BY-SA-4.010
Chococorne hotswap plate
130 × 87.7 mm22 parts2LCC-BY-SA-4.010
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k