Praxis
Iheb-AG·praxis·sources/stm32f401re/raw/board.kicad_sch

About the Praxis PCB
Praxis is an open source STM32 PCB design by Iheb-AG, published on GitHub under the MIT license. It is a board, with 4 components from 4 distinct parts.
Its main chip is the STM32F401RE, from the STM32 family. By type, the board carries 1 IC, 1 connector, 1 capacitor and 1 resistor.
From the project
Vectorless hardware knowledge and MCP tooling for AI-assisted embedded development.
From hardware references to AI-assisted firmware development.
Quick start · Documentation · Examples · Contribute · Roadmap
Praxis gives coding assistants source-backed hardware context through the Model Context Protocol. It compiles engineering sources into indexed Markdown bundles, retrieves complete register tables and board connections, and checks documentation dependencies before peripheral bring-up. Local, vectorless retrieval: no embeddings or vector database.
Main components on the Praxis
Praxis bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401RE | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | UART header | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | 100nF | C_0603_1608Metric | C1 |
| 1 | 33R | R_0603_1608Metric | R1 |
Praxis design files
The KiCad project lives in the Iheb-AG/praxis repository on GitHub; these links point at the commit this page was built from.
Praxis: common questions
What microcontroller does the Praxis use?
The Praxis is built around the STM32F401RE, from the STM32 family.
How many components are on the Praxis?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Praxis design files?
From the Iheb-AG/praxis repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the Praxis design in my own project?
Yes, under the terms of its MIT license, which Iheb-AG chose for the repository.
Can I test firmware for the Praxis without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k