32-bit-SRAM-
About the 32-bit-SRAM- PCB
32-bit-SRAM- is an open source PCB design by inderjit303, published on GitHub under the GPL-3.0 license. It is a board, with 35 components from 8 distinct parts.
Other key parts include the fivetothree_two_decoder_isd, plot_v1, adc_bridge_6 and dac_bridge_8. By type, the board carries 22 ICs and 4 crystals.
From the project
32-bit SRAM implementation in eSim using Skywater 130nm CMOS technology
This repository discusses implementation of mixed signal circuit design of a 32-bit SRAM using eSim and Google Skywater 130nm PDK as part of 'Mixed signal SoC Design Marathon using eSim and SKY130'
- Abstract - Building blocks for 32 bit SRAM - 3x8 SRAM Address Decoder - 5x32 SRAM Address Decoder - 6T SRAM Cell - Data Writer circuit - Sense amplifier circuit - Open Source Tools Used eSim NgSpice Makerchip Verilator - Pre-Layout implemented Circuit Schematics and Simulations Implemented Circuits Pre-Layout Simulation in eSim - Author - Acknowlegdements - References
Main components on the 32-bit-SRAM-
32-bit-SRAM- bill of materials (BOM)
35 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | fivetothree_two_decoder_isd | U1 | |
| 16 | plot_v1 | U2, U3, U4, U5, U6, U12, U13, U14 +8 | |
| 1 | adc_bridge_6 | U7 | |
| 4 | dac_bridge_8 | U8, U9, U10, U11 | |
| 4 | 8_bit_SRAM_isd | X1, X2, X3, X4 | |
| 1 | SKY130mode | scmode1 | |
| 7 | pulse | R1 | v1, v2, v3, v4, v5, v7, v8 |
| 1 | DC | R1 | v6 |
32-bit-SRAM- design files
The KiCad project lives in the inderjit303/32-bit-SRAM- repository on GitHub; these links point at the commit this page was built from.
32-bit-SRAM-: common questions
How many components are on the 32-bit-SRAM-?
35 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the 32-bit-SRAM- design files?
From the inderjit303/32-bit-SRAM- repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the 32-bit-SRAM- design in my own project?
Yes, under the terms of its GPL-3.0 license, which inderjit303 chose for the repository.