Carte DFRobotic
About the Carte DFRobotic PCB
Carte DFRobotic is an open source PCB design by INSA-GEI, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 85 mm, with 51 components from 28 distinct parts.
Other key parts include the FRDM-KL25Z, XBee, HDSP-7501, TCL6C598 and MIC29500-3.3WT. By type, the board carries 15 resistors, 13 capacitors, 12 connectors, 5 ICs, 4 switches and 1 transistor.
From the project
Dépôt du département GEI de l'INSA Toulouse pour la compétition NXPCup
[...] Is a keyword or asmallsentence describing this version in particular (e.g. "sourcedangerouslyfast" or "sourcesafest`").
If it doesn't work, save your changes elsewhere, and retry with
NB : While commiting, use Esc :wq Enter. A good commit message is brief, and completes the following statement : This commit will ....
git checkout intteam1: Integration branch for team 1 git checkout intteam2: Integration branch for team 2
Main components on the Carte DFRobotic
Carte DFRobotic bill of materials (BOM)
51 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FRDM-KL25Z | FRDM-KL25Z | U1 |
| 1 | XBee | Xbee3 | U2 |
| 1 | HDSP-7501 | HDSP-A151 | U3 |
| 1 | TCL6C598 | TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | MIC29500-3.3WT | TO-220-3_Vertical | U5 |
| 1 | NTR3C21NZT1G | SOT-23 | Q1 |
| 4 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | J1, J14, J15, J17 |
| 2 | Samtec FTS-105-01-L-DV | PinHeader_2x05_P1.27mm_Vertical | J7, J8 |
| 2 | DF3A-5P-2DS | DF3A-5P-2DS | J9, J10 |
| 2 | DF3A-4P-2DS | DF3A-4P-2DS | J11, J12 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Conn_02x05_Odd_Even | Multicomp_MC9A12-1034_2x05_P2.54mm_Vertical | J16 |
| 1 | SMR8016C-1 | Nidec_Copal_SMR-8016C | SW1 |
| 1 | Reset | SW_PUSH_6mm_H4.3mm | SW2 |
| 1 | USER1 | SW_PUSH_6mm_H4.3mm | SW3 |
| 1 | USER2 | SW_PUSH_6mm_H4.3mm | SW4 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 10 | 100nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C5, C6, C7, C8, C9, C10, C11 +2 |
| 1 | 100µF | CP_Radial_D6.3mm_P2.50mm | C2 |
| 2 | 1µF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C13, C16 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2.2K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 2 | 10K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R4 |
| 1 | 100R | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5 |
| 4 | 4.7K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R6, R7, R8, R9 |
| 2 | 220R | R_Array_Convex_4x0603 | RN1, RN2 |
| 1 | 10K | R_Array_Convex_4x0603 | RN3 |
| 2 | 2.2K | R_Array_Convex_4x0603 | RN4, RN6 |
| 2 | 3.3K | R_Array_Convex_4x0603 | RN5, RN7 |
Carte DFRobotic design files
The KiCad project lives in the INSA-GEI/insa-nxpcup repository on GitHub; these links point at the commit this page was built from.
Carte DFRobotic: common questions
How big is the Carte DFRobotic PCB?
The Carte DFRobotic measures 100 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte DFRobotic?
51 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte DFRobotic design files?
From the INSA-GEI/insa-nxpcup repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Carte DFRobotic design in my own project?
Yes, under the terms of its GPL-3.0 license, which INSA-GEI chose for the repository.
More boards in insa-nxpcup
ALAMAK Carte Puissance
114 × 57 mm55 parts2LGPL-3.09
Carte Capteur NXP
129.9 × 60 mm51 parts2LGPL-3.09
Carte LED
100 × 38 mm22 parts2LGPL-3.09
Encodeur Optique
24.5 × 28.5 mm20 parts2LGPL-3.09
Encodeurs-DFRobotics
20.5 × 20 mm12 parts2LGPL-3.09
PCB Camera
34 × 31 mm10 parts2LGPL-3.09