Analog-Function-Generator
About the Analog-Function-Generator PCB
Analog-Function-Generator is an open source PCB design by ishita-pathak, published on GitHub under the MIT license. It is a 2-layer board measuring 48.9 × 42.1 mm, with 15 components from 9 distinct parts.
Other key parts include the LM6171xxN. By type, the board carries 7 resistors, 3 ICs and 3 capacitors.
From the project
Analog Function Generator using uA741 Op-Amps with PSpice Simulation, Hardware Implementation and KiCad PCB Design.
- Project Overview - Project Goals - Key Features - Tech Stack - Circuit Components - Design Workflow - Generating the Output - Verification - PCB Workflow - How to Use This Repository - Documentation & Deliverables - Limitations - Future Improvements - Author - License
This repository contains an electronic circuit design created using KiCad. The design uses conventional through-hole (THT) components and DIP-packaged ICs.
Main components on the Analog-Function-Generator
Analog-Function-Generator bill of materials (BOM)
15 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LM6171xxN | DIP-8_W7.62mm | U1, U2, U3 |
| 1 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 100k | Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 2 | 10n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2, C3 |
| 3 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R5, R7 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 2 | 220K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R6 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Analog-Function-Generator design files
The KiCad project lives in the ishita-pathak/Analog-Function-Generator repository on GitHub; these links point at the commit this page was built from.
- Layoutcircuit-design.kicad_pcb
- Schematiccircuit-design.kicad_sch
Analog-Function-Generator: common questions
How big is the Analog-Function-Generator PCB?
The Analog-Function-Generator measures 48.9 × 42.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Analog-Function-Generator?
15 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Analog-Function-Generator design files?
From the ishita-pathak/Analog-Function-Generator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Analog-Function-Generator design in my own project?
Yes, under the terms of its MIT license, which ishita-pathak chose for the repository.