A-10C UFC
About the A-10C UFC PCB
A-10C UFC is an open source PCB design by IzeHouze, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 258.2 × 69.1 mm, with 45 components from 8 distinct parts.
By type, the board carries 35 switches, 8 connectors, 1 diode and 1 resistor.
From the project
DCS A-10C UFC code
Front panel included using Front Panel Designer.
In fact this is the 1.1 revision. A noob mistake I found was that you cannot use Digital pins 0 and 1 if you use this card on a serial port, as those are Transmit and Receive for the USB COM port.
I have revised the schematics and layout to move those IOs to A0 and A1 on J3.
I have also added in the connections for a NANO.
A-10C UFC bill of materials (BOM)
45 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x08_MountingPin | PinHeader_1x08_P2.54mm_Vertical | J1, J6 |
| 1 | Conn_01x10_MountingPin | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_MountingPin | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 2 | Conn_01x15_Female | PinSocket_1x15_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_01x02 | JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J7, J8 |
| 35 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +27 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
A-10C UFC design files
The KiCad project lives in the IzeHouze/A-10C-UFC repository on GitHub; these links point at the commit this page was built from.
A-10C UFC: common questions
How big is the A-10C UFC PCB?
The A-10C UFC measures 258.2 × 69.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the A-10C UFC?
45 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the A-10C UFC design files?
From the IzeHouze/A-10C-UFC repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the A-10C UFC design in my own project?
Yes, under the terms of its GPL-3.0 license, which IzeHouze chose for the repository.
