Gigabit-Ethernet to-USB-C-Adapter
izzeldeenakloub·Gigabit-Ethernet-to-USB-C-Adapter
About the Gigabit-Ethernet to-USB-C-Adapter PCB
Gigabit-Ethernet to-USB-C-Adapter is an open source PCB design by izzeldeenakloub, published on GitHub. It is a 4-layer board measuring 82.7 × 32.1 mm, with 78 components from 31 distinct parts.
Other key parts include the 93AA66C-I/SN, AP2112K-3.3 and LAN7800/Y9X. By type, the board carries 46 capacitors, 13 resistors, 8 inductors, 3 ICs, 2 diodes and 1 crystal.
From the project
A KiCad design project for a USB-C to Gigabit Ethernet adapter and my first complete 4-layer PCB layout.
A KiCad design project for a USB-C to Gigabit Ethernet adapter and my first complete 4-layer PCB layout.
This project was created as a proof of concept to practice:
- Four-layer PCB stack-up design - USB-C connector integration - Gigabit Ethernet routing and component placement - Ground and power plane organization - Differential-pair placement and routing - KiCad schematic and PCB layout workflows

Main components on the Gigabit-Ethernet to-USB-C-Adapter
Gigabit-Ethernet to-USB-C-Adapter bill of materials (BOM)
78 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 93AA66C-I/SN | SOIC8-N_MC_MCH | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | LAN7800/Y9X | SQFN48_7X7_Y9X_MCH | U5 |
| 1 | 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1054500101 | MOLEX_1054500101 | J5 |
| 3 | 824012823 | DFN_012823_WRE | CR1, CR2, CR3 |
| 1 | WE-RJ45_7499111121A | 7499111121A | T1 |
| 1 | 20V | C_0805_2012Metric | D1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 2 | 110R@100MHz | L_1206_3216Metric | FB1, FB2 |
| 1 | 110R@100MHz | L_0603_1608Metric | FB3 |
| 1 | 1.2uH | IND_WE-MAPI_3020_WRE | L1 |
| 2 | L_Coupled | CHIP_35600_WRE | L2, L3 |
| 1 | L_Coupled | SMT_32090_WRE | L4 |
| 1 | 3.3uH | IND_WE-LQS_3015_WRE | L5 |
| 2 | 4.7uF | C_0805_2012Metric | C1, C2 |
| 23 | 100nF | C_0603_1608Metric | C3, C8, C9, C10, C11, C12, C13, C22 +15 |
| 3 | 10uF | C_0805_2012Metric | C4, C6, C43 |
| 3 | 100nF | C_0805_2012Metric | C5, C7, C44 |
| 2 | 12pF | C_0603_1608Metric | C26, C27 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1uF | C_0603_1608Metric | C38, C39, C47 |
| 1 | 22uF | C_0805_2012Metric | C41 |
| 2 | 100nF | C_0402_1005Metric | C45, C46 |
| 1 | 10nF | C_0603_1608Metric | C48 |
| 2 | TBE | C_1210_3225Metric | C49, C52 |
| 4 | TBE | C_1206_3216Metric | C50, C51, C53, C54 |
| 2 | 330R | R_0603_1608Metric | R1, R6 |
| 5 | 10K | R_0603_1608Metric | R2, R10, R11, R17, R18 |
| 1 | 12k | R_0603_1608Metric | R7 |
| 1 | 5k1 | R_0603_1608Metric | R9 |
| 4 | 2K | R_0603_1608Metric | R12, R13, R14, R15 |
Gigabit-Ethernet to-USB-C-Adapter design files
The KiCad project lives in the izzeldeenakloub/Gigabit-Ethernet-to-USB-C-Adapter repository on GitHub; these links point at the commit this page was built from.
- LayoutusbToGB_Adapter.kicad_pcb
- SchematicusbToGB_Adapter.kicad_sch
Gigabit-Ethernet to-USB-C-Adapter: common questions
How big is the Gigabit-Ethernet to-USB-C-Adapter PCB?
The Gigabit-Ethernet to-USB-C-Adapter measures 82.7 × 32.1 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Gigabit-Ethernet to-USB-C-Adapter?
78 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gigabit-Ethernet to-USB-C-Adapter design files?
From the izzeldeenakloub/Gigabit-Ethernet-to-USB-C-Adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gigabit-Ethernet to-USB-C-Adapter design in my own project?
The repository has no license, so all rights stay with izzeldeenakloub. Use it as a reference, and ask the author before reusing the design.