MUTIF Backplane 5
About the MUTIF Backplane 5 PCB
MUTIF Backplane 5 is an open source PCB design by ja1umi, published on GitHub under the MIT license. It is a 2-layer board measuring 131 × 221 mm, with 42 components from 24 distinct parts.
Other key parts include the NE556. By type, the board carries 19 connectors, 10 capacitors, 6 resistors, 3 switches, 2 diodes and 1 IC.
From the project
Verious design information related to my home-brewed MN1613 16-bit computer
Main components on the MUTIF Backplane 5
MUTIF Backplane 5 bill of materials (BOM)
42 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE556 | DIP-14_W7.62mm_LongPads | U1 |
| 2 | CONN_01X06 Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 1 | SLOT 1 | PinHeader_1x40_P2.54mm_Vertical | J3 |
| 1 | SLOT 2 | PinHeader_1x40_P2.54mm_Vertical | J4 |
| 1 | SLOT 3 | PinHeader_1x40_P2.54mm_Vertical | J5 |
| 1 | SLOT 4 | PinHeader_1x40_P2.54mm_Vertical | J6 |
| 1 | SLOT 5 | PinHeader_1x40_P2.54mm_Vertical | J7 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 5 | CONN_01X14_PIN Conn_01x14_Pin | PinHeader_1x14_P2.54mm_Vertical | J9, J10, J11, J12, J13 |
| 1 | DC Jack MJ-179PH | MJ-179PH | J14 |
| 5 | CONN_01X10_PIN Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J15, J16, J17, J18, J19 |
| 1 | 1M | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 2 | SW_Push_SPDT 8MS8P1B05VS2QES | 8MSP0340 | SW1, SW2 |
| 1 | SW_SPDT_321 2MS1T1B4M7QES | 2MS1T1B4M7QES | SW3 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | BAT43 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 6 | 0.1U 0.1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C5, C6 |
| 2 | 0.01U 0.01u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C7, C8 |
| 1 | 1.5U 1.5u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 10u | CP_Radial_D5.0mm_P2.50mm | C10 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4K7 4k7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 3 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3, R6 |
| 1 | 2K2 2k2 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
MUTIF Backplane 5 design files
The KiCad project lives in the ja1umi/MUTIF1613Project repository on GitHub; these links point at the commit this page was built from.
MUTIF Backplane 5: common questions
How big is the MUTIF Backplane 5 PCB?
The MUTIF Backplane 5 measures 131 × 221 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MUTIF Backplane 5?
42 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MUTIF Backplane 5 design files?
From the ja1umi/MUTIF1613Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MUTIF Backplane 5 design in my own project?
Yes, under the terms of its MIT license, which ja1umi chose for the repository.
