17 open source boards using the NE556

Real designs built with the NE556, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the NE556

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the NE556 connects to, and the resistors, capacitors and other passives placed on it.

  • The THR pins have a capacitor to GND on 13 of 14 designs, most often 22 nF (then 100 nF).
  • The DIS pins have a series resistor on 12 of 14 designs, most often 1 kΩ (then 100 Ω).
  • The CV pins have a capacitor to GND on 12 of 14 designs, most often 10 nF (then 100 nF).
  • The R pins is tied to 5V on 93% of them (a signal on 2).
DISpin 1, 13Connected to: Signal 100%
  • Series resistor on 86% · 1 kΩ (6), 100 Ω (2), 220 Ω (2)
  • Capacitor to GND on 71% · 22 nF (4), 100 nF (3), 10 nF (2)
  • Pull-up to VCC on 57% · 1 kΩ (5), 1 MΩ (3), 22 kΩ (2)
THRpin 2, 12Connected to: Signal 100%
  • Capacitor to GND on 93% · 22 nF (4), 100 nF (4), 10 nF (4)
  • Series resistor on 64% · 100 Ω (4), 220 Ω (2), 1 kΩ (2)
  • Pull-up to VCC on 50% · 1 MΩ (3), 1 kΩ (1), 330 kΩ (1)
CVpin 3, 11Connected to: Signal 86%
  • Capacitor to GND on 86% · 10 nF (16), 100 nF (5), 4.7 nF (1)
Rpin 4, 10Connected to: 5V 93%
TRpin 6, 8Connected to: NE556 29%
  • Capacitor to GND on 64% · 10 µF (2), 10 nF (2), 1 µF (2)
  • Pull-up to 5V on 36% · 1 kΩ (3), 10 kΩ (2)
  • Series resistor on 36% · 220 Ω (2), 1 kΩ (2), 5.6 kΩ (1)
GNDpin 7Connected to: GND 100%
VCCpin 14Connected to: 5V 100%
  • Decoupling capacitor on 43% · 100 nF (5), 1 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SB-mini-II by simonboak, Gd IWM proto pcb by baldengineer, NQSAP Loader / Debugger and Clock by TomNisbet and Sequencer by sphawes.

The NE556 in open source designs

The gallery holds 17 open source boards using the NE556 from 16 GitHub repositories; a typical one measures about 100.5 × 96 mm and carries around 39 components.

75% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.

The most starred is SB-mini-II by simonboak.

Microcontrollers on boards using the NE556

NE556: common questions

Where can I find a NE556 reference design?

Each of the 17 boards on this page is a real design using the NE556. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NE556 THR pin connected?

The THR pins have a capacitor to GND on 13 of 14 designs, most often 22 nF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the NE556.

What resistor goes on the NE556 DIS pin?

The DIS pins have a series resistor on 12 of 14 designs, most often 1 kΩ (then 100 Ω). Counted from the KiCad layouts of 14 open source designs using the NE556.

How is the NE556 CV pin connected?

The CV pins have a capacitor to GND on 12 of 14 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the NE556.

What parts are used alongside the NE556?

The 74LS32, 74LS00, 74LS04, 74LS08 and 74LS138 appear in the most repositories here.

Which microcontrollers do boards using the NE556 use?

Most are built on RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the NE556?

The median is 100.5 × 96 mm, and 75% are two-layer designs.

What is the most popular open source board using the NE556?

By GitHub stars, SB-mini-II by simonboak, with 74 stars.

Can I simulate one of these boards using the NE556 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part