Esp32-dimmer
jackestar·esp32-dimmer·kicad/dimmer/dimmer.kicad_sch
About the Esp32-dimmer PCB
Esp32-dimmer is an open source PCB design by jackestar, published on GitHub under the MIT license. It is a board, with 10 components from 8 distinct parts.
Other key parts include the ON3181 and MOC3020M. By type, the board carries 5 resistors, 2 ICs, 1 transistor, 1 connector and 1 switch.
From the project
dimmer driver, cross-zero and triac using esp32 and idf
Simple ESP32-based dimmer project (firmware + PCB + web UI). This repo contains the ESP-IDF firmware, KiCad design files, and a small web UI used by the device.
Adjust sdkconfig or run idf.py menuconfig to change board-specific settings.
Main components on the Esp32-dimmer
Esp32-dimmer bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ON3181 | SOP-4_4.4x2.6mm_P1.27mm | U1 |
| 1 | MOC3020M | U2 | |
| 1 | BTA16-600B | TO-220-3_Vertical | Q1 |
| 1 | Input/Output | J3 | |
| 1 | SW_Push | SW1 | |
| 1 | 220 | R1 | |
| 2 | 47k | R2, R5 | |
| 2 | 10k | R3, R4 |
Esp32-dimmer design files
The KiCad project lives in the jackestar/esp32-dimmer repository on GitHub; these links point at the commit this page was built from.
- Schematickicad/dimmer/dimmer.kicad_sch
Esp32-dimmer: common questions
How many components are on the Esp32-dimmer?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-dimmer design files?
From the jackestar/esp32-dimmer repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Esp32-dimmer design in my own project?
Yes, under the terms of its MIT license, which jackestar chose for the repository.