Camera
About the Camera PCB
Camera is an open source PCB design by JackkP, published on GitHub. It is a 6-layer board measuring 65.6 × 55 mm, with 136 components from 40 distinct parts.
Other key parts include the AXP203, V3s-eLQFP128 and TPS63020. By type, the board carries 79 capacitors, 29 resistors, 7 jumpers, 6 connectors, 5 inductors and 4 ICs.
From the project
Repository for Team 25 Purdue ECE Senior Design Fall 2025 49022 Senior Design Project. This contains all of the code and schematics for the project. Course-related documentation is stored in google.
Main components on the Camera
Camera bill of materials (BOM)
136 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AXP203 | QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm | U1 |
| 1 | V3s-eLQFP128 | LQFP-128_14x14mm_P0.4mm | U2 |
| 2 | TPS63020 | IC_TPS63020DSJT | U3, U4 |
| 1 | 32.768kHz XTAL | XTAL_ECS-.327-12.5-38-TR | Y2 |
| 1 | 24MHz XTAL | XTAL_ECS-240-12-36-AGN-TR | Y4 |
| 1 | MIPI-CSI2 | TE_1-84952-5_1x15-1MP_P1.0mm_Horizontal | J1 |
| 1 | USB_A | USB_A_Receptacle_GCT_USB1046 | J2 |
| 1 | SDA | AMPHENOL_10067099-200LF | J3 |
| 1 | UART_0 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | UART_2 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J6 |
| 1 | B2B-PH-SM4-TB | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | BT1 |
| 7 | ~ | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 1 | PWR | SW_SPST_PTS647_Sx38 | SW1 |
| 1 | RST | SW_SPST_PTS647_Sx38 | SW2 |
| 1 | LED_RGB | RGB_LED IN-S66TFT5R5G5B | D1 |
| 2 | 1uH | L_Murata_DFE201610P | L1, L2 |
| 3 | 4.7uH | L_TDK_SLF6045 | L5, L8, L9 |
| 27 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C11, C12, C13, C14, C15, C16, C17 +19 |
| 2 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C51 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 14 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C8, C9, C10, C20, C21, C26 +6 |
| 25 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C19, C25, C30, C35, C36, C42 +17 |
| 5 | 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C44, C61, C73, C74 |
| 4 | 18p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C38, C39, C40, C41 |
| 2 | 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C55, C57 |
| 1 | 10M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 6 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R6, R18 |
| 2 | 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 1 | 240 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 3 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R31 |
| 1 | 0.03 | R_1206_3216Metric | R14 |
| 2 | 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R30 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 3 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R28, R29 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21 |
| 2 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23 |
| 1 | 1.62M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 180k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | 768k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | 137k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
Camera design files
The KiCad project lives in the JackkP/Semi-Truck-Backup-Camera repository on GitHub; these links point at the commit this page was built from.
- LayoutCamera_PCB/CameraPCB.kicad_pcb
- SchematicCamera_PCB/CameraPCB.kicad_sch
Camera: common questions
How big is the Camera PCB?
The Camera measures 65.6 × 55 mm, has 6 copper layers and is 1.56888 mm thick.
How many components are on the Camera?
136 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Camera design files?
From the JackkP/Semi-Truck-Backup-Camera repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Camera design in my own project?
The repository has no license, so all rights stay with JackkP. Use it as a reference, and ask the author before reusing the design.
