Fahrenheat hardware
jagheterfredrik·fahrenheat-hardware
About the Fahrenheat hardware PCB
Fahrenheat hardware is an open source PCB design by jagheterfredrik, published on GitHub. It is a 2-layer board measuring 18.5 × 32.5 mm, with 21 components from 13 distinct parts.
Other key parts include the TPS5430DDAR and MCP251863T-E/SS. By type, the board carries 11 capacitors, 3 connectors, 3 resistors, 2 ICs, 1 diode and 1 inductor.
From the project
Fahrenheat v2.1 hardware
A hat for the ESP32-C3 SuperMini that adds CAN-FD and 12 V input. Firmware written on Zephyr.
- CAN: MCP251863 (CAN FD controller + transceiver) over SPI - Power: TPS5430 buck, VCC in → 5 V to the SuperMini - CN1: 3.81 mm terminal — VCC, GND, CANL, CANH
All parts carry LCSC numbers. python3 exportjlcpcb.py writes gerbers, BOM and CPL to jlcpcb/` for JLCPCB assembly.

Main components on the Fahrenheat hardware
Fahrenheat hardware bill of materials (BOM)
21 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430DDAR TI(德州仪器) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP | U1 |
| 1 | MCP251863T-E/SS MICROCHIP(美国微芯) | SSOP-28_L10.2-W5.3-P0.65-LS7.8-BL | U2 |
| 1 | WJ15EDGVC-3.81-4P KANGNEX(康奈克斯电气) | CONN-TH_4P-P3.81_WJ2EDGVC-3.81-4P | CN1 |
| 2 | HDR-F-2.54_1x6 | HDR-F-2.54_1X6 | CN3, CN4 |
| 1 | 1N5819WS Hottech(合科泰) | SOD-323_L1.8-W1.3-LS2.5-RD | D1 |
| 1 | FHD4020S-150MT 15uH cjiang(长江微电) | IND-SMD_L4.0-W4.0 | L1 |
| 4 | CL10A106MA8NRNC 10uF SAMSUNG(三星) | C0603 | C1, C2, C3, C4 |
| 1 | CL05B103KB5NNNC 10nF SAMSUNG(三星) | C0402_LongPad | C5 |
| 1 | CL05A106MQ5NUNC 10uF SAMSUNG(三星) | C0402_LongPad | C6 |
| 2 | TAJB107K006RNJ 100uF Kyocera AVX | CASE-B_3528 | C7, C8 |
| 3 | CL05B104KO5NNNC 100nF SAMSUNG(三星) | C0402 | C9, C10, C11 |
| 2 | 0402WGF1002TCE 10kΩ UNI-ROYAL(厚声) | R0402 | R1, R2 |
| 1 | 0402WGF4701TCE 4.7kΩ UNI-ROYAL(厚声) | R0402 | R3 |
Fahrenheat hardware design files
The KiCad project lives in the jagheterfredrik/fahrenheat-hardware repository on GitHub; these links point at the commit this page was built from.
- Layoutfahrenheat.kicad_pcb
- Schematicfahrenheat.kicad_sch
Fahrenheat hardware: common questions
How big is the Fahrenheat hardware PCB?
The Fahrenheat hardware measures 18.5 × 32.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fahrenheat hardware?
21 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fahrenheat hardware design files?
From the jagheterfredrik/fahrenheat-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Fahrenheat hardware design in my own project?
The repository has no license, so all rights stay with jagheterfredrik. Use it as a reference, and ask the author before reusing the design.