Sprocket panel
jamesmunns·brick-mount·boards/sprocket/sprocket-panel.kicad_pcb
About the Sprocket panel PCB
Sprocket panel is an open source STM32 PCB design by jamesmunns, published on GitHub. It is a 4-layer board measuring 97 × 87 mm, with 32 components from 17 distinct parts.
Its main chip is the STM32G031G8U6, from the STM32 family. Other key parts include the AP2210N-3.3TRG1. By type, the board carries 7 capacitors, 7 resistors, 6 diodes, 5 connectors, 2 ICs and 2 switches.
From the project
Put your circuits on your plastic bricks of choice
Boards designed to be compatible with LEGO and other plastic building blocks.
There are KiCAD footprints for a variety of different brick arrangements in the parts folder. I've also included a number of personal projects using these footprints in the boards/ folder.
The contents of the parts/brick-49id-60od.pretty/ folder are licensed under a CC0 license.

Main components on the Sprocket panel
Sprocket panel bill of materials (BOM)
32 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G031G8U6 | STM32G031G8U6 | U1 |
| 1 | AP2210N-3.3TRG1 | SOT-23 | U2 |
| 1 | NX7002BKR | SOT-23 | Q1 |
| 1 | SPROCKET-CONN | sprocket-pins | J1 |
| 2 | Conn_01x04_MountingPin | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4, J6 |
| 2 | Conn_01x04_MountingPin | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5, J7 |
| 2 | Conn_01x02 | brick-1x2 | MH1, MH2 |
| 2 | SW_Push | K2-1808SN-A4SW-01 | SW1, SW2 |
| 1 | B5819W | D_SOD-123 | D1 |
| 2 | TC3838RGB | TC3838RGB | D2, D3 |
| 3 | LED | D_0603_1608Metric | D4, D5, D6 |
| 2 | 100nF | C_0402_1005Metric | C1, C2 |
| 1 | 4.7uF | C_0402_1005Metric | C3 |
| 3 | 1uF | C_0402_1005Metric | C4, C6, C7 |
| 1 | 2.2uF | C_0603_1608Metric | C5 |
| 2 | 10K | R_0402_1005Metric | R2, R3 |
| 5 | 1K | R_0402_1005Metric | R4, R5, R6, R7, R8 |
Sprocket panel design files
The KiCad project lives in the jamesmunns/brick-mount repository on GitHub; these links point at the commit this page was built from.
Sprocket panel: common questions
What microcontroller does the Sprocket panel use?
The Sprocket panel is built around the STM32G031G8U6, from the STM32 family.
How big is the Sprocket panel PCB?
The Sprocket panel measures 97 × 87 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Sprocket panel?
32 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sprocket panel design files?
From the jamesmunns/brick-mount repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sprocket panel design in my own project?
The repository has no license, so all rights stay with jamesmunns. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sprocket panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in brick-mount
Choc keypad
jamesmunns
95.5 × 127.5 mm147 parts2LNo license40Clink
jamesmunns
47 × 47 mm59 parts2LNo license40Char
jamesmunns
15.5 × 47.5 mm58 parts4LNo license40Char panel
jamesmunns
34 × 47.5 mm58 parts4LNo license40Proto half panel
jamesmunns
97 × 95 mm38 parts2LNo license40Proto half cables panel
jamesmunns
97 × 95 mm38 parts2LNo license40STM32
Sprocket
jamesmunns
47 × 15 mm32 parts4LNo license40Black pill breakout
jamesmunns
79 × 47 mm25 parts2LNo license40Proto quarter panel
jamesmunns
97 × 99 mm18 parts2LNo license40Feather medium
jamesmunns
31.5 × 63.5 mm15 parts2LNo license40Keypad topper
jamesmunns
95 × 39 mm10 parts2LNo license40
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k