GAS Rev A - Filter Clipper
About the GAS Rev A - Filter Clipper PCB
GAS Rev A - Filter Clipper is an open source PCB design by jdg511, published on GitHub. It is a 2-layer board measuring 140 × 90 mm, with 57 components from 21 distinct parts.
Other key parts include the OPA1679IDR. By type, the board carries 17 resistors, 16 capacitors, 14 diodes, 5 connectors, 3 relays and 2 ICs.
From the project
KiCad 10 is installed locally on this machine.
KiCad 10 is installed locally on this machine.
This folder is the intended home for the hardware project once schematic capture starts.
- GAS-Hardware.kicadpro - GAS-Hardware.kicadsch - one schematic file scaffold per board - board layouts for: - input-output - tank-driver-recovery - ext-tank-routing - crossfade-feedback-wet-summing - filter-clipper
The KiCad project now has a real top-level hierarchical shell, first-pass real symbol capture across every rev-A child sheet, and a first-pass electrically assigned power/backplane page.
Main components on the GAS Rev A - Filter Clipper
GAS Rev A - Filter Clipper bill of materials (BOM)
57 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPA1679IDR | SOIC-14_3.9x8.7mm_P1.27mm | U401, U402 |
| 1 | JXF-FILT B3B-XH-A | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | P401 |
| 1 | JFILT-WET B3B-XH-A | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | P402 |
| 1 | JFILT-CTL-A B12B-XH-A | JST_XH_B12B-XH-A_1x12_P2.50mm_Vertical | P403 |
| 1 | JFILT-PWR B3P-VH-B | JST_VH_B3P-VH_1x03_P3.96mm_Vertical | P404 |
| 1 | JFILT-CTL-B B12B-XH-A | JST_XH_B12B-XH-A_1x12_P2.50mm_Vertical | P405 |
| 3 | G5V-2 DC5 | Relay_DPDT_Omron_G5V-2 | K401, K402, K403 |
| 6 | 1N4148W | D_SOD-123 | D401, D402, D403, D404, D421, D422 |
| 4 | LED red | LED_0805_2012Metric | D405, D406, D407, D408 |
| 4 | 1N5819HW | D_SOD-123 | D409, D410, D411, D412 |
| 2 | 47n | C_1210_3225Metric | C401, C421 |
| 6 | 10n | C_1210_3225Metric | C403, C406, C407, C423, C426, C427 |
| 2 | 47p | C_0805_2012Metric | C405, C425 |
| 4 | 100n | C_0805_2012Metric | C591, C592, C593, C594 |
| 2 | 22u | C_1210_3225Metric | C595, C596 |
| 4 | 1k | R_0805_2012Metric | R401, R406, R421, R426 |
| 4 | 47k | R_0805_2012Metric | R402, R407, R422, R427 |
| 2 | 39k | R_0805_2012Metric | R403, R423 |
| 2 | 10k | R_0805_2012Metric | R404, R424 |
| 2 | 4.7k | R_0805_2012Metric | R405, R425 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100 | R_0805_2012Metric | R408, R428, R432 |
GAS Rev A - Filter Clipper design files
The KiCad project lives in the jdg511/GAS repository on GitHub; these links point at the commit this page was built from.
GAS Rev A - Filter Clipper: common questions
How big is the GAS Rev A - Filter Clipper PCB?
The GAS Rev A - Filter Clipper measures 140 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GAS Rev A - Filter Clipper?
57 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GAS Rev A - Filter Clipper design files?
From the jdg511/GAS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GAS Rev A - Filter Clipper design in my own project?
The repository has no license, so all rights stay with jdg511. Use it as a reference, and ask the author before reusing the design.
More boards in GAS
GAS Rev A - Tank Driver Recovery Board
170 × 110 mm86 parts2LNo license0
GAS Rev A - Input Output Board
160 × 75 mm57 parts2LNo license0
GAS Rev A - Ext Tank Routing
120 × 80 mm46 parts2LNo license0
GAS Rev A - Crossfade Feedback Wet
100 × 70 mm33 parts2LNo license0
GAS Rev A - Power Backplane
120 × 80 mm29 parts2LNo license0